KFP600WH KitchenAid Food Processor - Instructions

Absolutely couldn't budge the old sleeve with pliers. Prying from the bottom would have broken the plastic boss on the case. Wound up gripping the tip of it tightly with a vise-grip, then hammering on a protruding part of the vise-grip (part of the "C-clamp" that's built into this particular model's handle). Took a number of hard whacks before it started to let go.
Cleaned off the motor shaft, removed gunk around its bottom, sprayed some food-grade machine oil into the bearing and the new sleeve. Tapped the sleeve onto the shaft using a wad of paper to cushion the hammer blows. When it seemed fully seated, checked clearance between the metal blade and the bottom of the food processor bowl—it should be about 1 mm.
Now this great machine is ready for another 25 years of service!

Just put it in the processor.

Put it in the bowl it fit perfectly, After we lost the orgianal blade my wife was ready to throw the whole food processor away. You saved me I figure $150.00

I didn't have a big repair to do, but was so impressed with PartSelect's rapid response to get me the part that I needed.

With the replacement parts substituted the above parts. Since the parts are made of transparent plastic, the closure was little tight in the beginning. I had to oil (with edible oil) the inside of the bowl at the edges and now it works smoothly. Thanks

Removed old bowl cover; threw it away and placed new cover on the processor. Then rocked and rolled with the cooking!!!

I opened the box and the parts were exactly right. It all fit together perfectly.

The tough part was finding the right size bowl as there were several bowls listed, Joelle B was very heloful and actually sent me pictures with measurements to find the right one. Food processor saved.

Finally both parts arrived. When putting the two together on the machine I must say it was a bit tight and is not going all the way in but works just fine. I can live with it.

I put the new bowl cover on & it worked perfectly. I was surprised how easy it was to locate the correct part. Also, it arrived in just a few days, much to my surprise. All in all, it was a great experience. Thank you very much.

Just twisted the new one in place in seconds. Very fast shipping, got the part in two days. Very satisfied.

The plastic shaft was split in several places. I used a screw driver to pop it off the metal shaft. When the new part arrived I slipped it in place and the food processor is back in working order. I was attempting to buy one from Ebay when I saw the advertisement for parts at the bottom of the ebay item. I thought why not try to fix it. I fixed it and I might as I am female and 73 years old. GO W O M A N .....

I had ordered 2 new stems several weeks ago. The parts never arrived. I called about the order and the parts were delivered within a few days.

I had a spare cover since I have done this before and I just ordered another workbowl. Just put them on and operate. Now I keep a spare of each on hand in case I do something dumb again. Love my food processor and use it every day.

Just put new parts on. Cleaning by hand instead of dishwasher will help this and all hard plastic items last much longer.