KEYL510BWH2 KitchenAid Dryer - Instructions

took the top and front off the dryer and had to route the new belt around the drum and through the pulleys, it was really easy and a heck of a lot cheaper then buying a new dryer

Called PartSelect, gave them the make and model number of the dryer and told them I needed a new belt for it. They gave me a price including shipment (under $20.00). I oreder the new belt and it arrived within a week. I also got an e-mail from PartSelect with a video showing how to replace the belt. This was very helpful. I was able to watch the video, take the dryer apart, replace the belt (after a few tries), and put the dryer back together. Problem solved! Thanks PartSelect.

I replaced the thermal fuse and the cycling thermostat, it was quite easy you need a 1/4 nut driver and remove the back of the machine and the two items are there in plain view simply remove and replace and voila,I am a woman with more knowledge of how things don't work when broken but laundry was going to pile up and I was desperate and couldn't afford to call a repair man and the husband doesn't fix things he doesn't use and he was planning on stringing clothes line throughout the house to remedy the problem :( it took me about 45 minutes but that included finding anything I might need and vacuuming and cleaningthe dryer and vents had I called a repairman I may have ran off with him ;) felt amazing when I turned it on and it worked perfectly!

very easy had to do some rewirng.who ever had it before me bypassed the fuse and several other things.

followed instructions from tutorial , so simple a child could do it.

Followed Video made this repair plus changed 3 sensors and changed fuse 2 times so far still no low heat

I got on line and searched for parts. I called Parts Select and a gentleman discussed the problem with me. He suggested what part(s) I possibly needed. He sent me the parts we discussed, (he said I would receive them withing 5 business days) I received them in 2. I watched the video which explained procedures for repair, I disassembled the dryer installed the thermostat, reassembled and with in 1/2 hour we were drying clothes. If I ever have any other problems I would call again for info. A great experience keep the good work

Just like the video. Disconnect the lint shute. Pop the top lose. Disconnect the door switch. I actually took the hooks off an removed the entire lid. Took the two screws out and removed the front panel. (The OEM idler was a teflon half-moon so I think the abrasion was what caused the belt to fail.) Put the belt around the drum. Rolled the drum to check the seal overlap was proper. Installed the idler and wrapped the belt around the motor shaft. Put it back together. Would have been a little easier with a helper.

followed the instructions given for my dryer. it took me 30 min before I could dry clothes.

Found an instructional, easy to follow video by PartSelect online. It was helpful to know what tools I needed before beginning the job. I first purchased only the belt. After taking the dryer apart, I saw the idler had also broke. It was very helpful that the parts arrived quickly. The video was the the greatest tool for doing this repair myself!!!!

i took the back apart to find the problem, then i went online to findout how tomremove the blower wheel, just googled it. Easy!Took itnall apart, just had a bit of trouble getting the wheel off, was on there very very tight. Ordered it through you, easy, and very very quick, received it in a day. I got an email explaining the reassembly process. Easy. Just follow it to a t and you will be fine. As a woman, this was an easy fix.

Tools and materials:

#2 Philips head screw driver
Standard flat-tip screw driver
1/4" nut driver or ratchet
1/4" drive sockets: 1/4, 5/16
Something 3-4 inches thick to wedge under drum for support (i.e. scrap 4x4, soap bottle, books)

Replacement Procedures:

1. Unplug dryer from wall outlet
2. Pull out lint screen
3. Remove 2 Philips screws attaching lint trap to dryer top
4. Lift hinged dryer top panel near front and lean it back on wall. You may need to pry between side panels and top with flat-tip screw driver to get it started.
5. Disconnect plug from dryer door switch near front
6. Remove two 1/4" and two 5/16" hex screws inside front panel near top.
7. Open dryer door and lift front panel straight up to disengage tabs from slots near bottom of front panel.
8. While supporting drum with one hand, lift front panel and set aside with other hand.
9. Slip replacement belt around drum with ribs facing drum and position it where old belt left its mark.
10. Wedge something under drum to support it while installing the belt.
11. Re-position tensioner in two slots in bottom panel just in front of motor. On my model the bend in the spring will be on the right side with the idler pulley to the left, when viewed from the front.
12. Ensuring the belt isn't twisted, thread a small loop of it through the opening in the tensioner just below the pulley.
13. With the left hand, push against the tensioner spring while working the loop over the drive pulley.
14. While supporting drum with one hand, remove whatever you put under the drum to support it.
15. Replace front panel by aligning the slots with the tabs near the bottom and lowering it into place.
16. Carefully slip the drum opening over the flange on the front panel and replace hex screws.
17. Slowly roll the drum in one direction or the other until the belt aligns and centers itself.
18. Re-connect the plug for the dryer door switch.
19. Lower the dryer top and press until it snaps back into place.
20. Replace philips screws to secure lint trap and replace lint screen.
21. Plug dryer back into wall outlet, close door, set to dry, and press start.

Took screwdriver popped out old latch in cabnet. Took pliers popped out latch out of door. Snaped new latch parts back in.

Videos say it all . Quick parts delivry .

Unplugged the dryer from the electric outlet; removed the screws from the back panel, removed screws from the unit and pulled down and outward to release the unit. Removed the wires and attached to the new unit. Plugged the dryer in to see if the unit worked. It worked, so I unplugged the electrical cord, replaced the back panel and screwed in the screws.