Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KBRA20ELSS01 > Parts

KBRA20ELSS01 KitchenAid Refrigerator - Parts

All parts for the KitchenAid Refrigerator KBRA20ELSS01

Below is a list of all parts for the KitchenAid Refrigerator KBRA20ELSS01. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KBRA20ELSS01
29-42 of 287
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.20

Touch-Up Paint - White

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, ...

$58.49

Ice Bucket

The ice bucket in your freezer catches and holds the ice when it is released by the icemaker. If your ice bucket is cracked or damaged, you may need to replace it to prevent a potential leak. This part is made of white plastic and is sold individually. This ice bucket is approximately 15 inches long by 12 inches wide. Many of our customers have rated this repair as very easy. To complete this repair, simply remove the old ice bucket and replace it with the new one. Be sure to remove any broken pieces of the old ice bucket before replacing it.

$9.08

Humidity Control Slide

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

$97.17

Ice Mold

This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake resistant which prevents the coating on the mold from flaking into the ice cubes when the ice mold begins to wear. The ice mold forms the ice cubes and the heater allows the ice cubes to fall from the ice mold to drop them into the ice bucket. You will need to remove the ice maker from the refrigerator to access the mold and heater assembly. This is a genuine replacement part.

$64.18

Defrost Timer - 120V 60Hz

If there is ice build-up in the freezer you may need to replace the defrost timer.

$17.39

Water Tube Connector/Union - 5/16 to 5/16

Sold Individually. - * Part may differ in appearance, but functions same as original.

$9.08

Front Crisper Seal

This part seals the gap between the crisper shelf glass and frame to stop liquid from spilling into the drawer.

$8.60

Single Wheel Assembly

This wheel is sold individually - purchase quantity needed.

$83.27

Pantry Drawer Glide - Left or Right Side

Mounting screws not included.

$82.44

Crisper Glass

Glass Only. Frame not included.

$50.88

Defrost Heater

The defrost heater keeps the cooling coils from frosting over.

$5.44

Compression Nut

The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required for this repair include a pair of pliers and a socket set. Before installing this part you should take all perishable foods out of your refrigerator and store them somewhere cool, unplug the refrigerator from the power source, and shut off the water supply. This repair may require you to wear work gloves to protect your hands, and is considered an easy do-it-yourself fix.

$39.06

Icemaker Wire Harness

This part connects to the electrical and allows power to flow through your appliance.

$19.14

Ice Stripper

This is an authentic appliance part that is sourced directly from the genuine manufacturer. This ice stripper functions by stripping the ice maker mold of ice during the ejection cycle, after the water has frozen into cubes. The ice stripper rotates to push the cubes into the ice bucket and prevents the ice from falling back into the mold. You may need to replace the ice stripper if your ice maker is no longer making ice. This part is approximately 9 inches long and is sold individually.

All Parts for the KBRA20ELSS01
29-42 of 287