JGD8430ADB Jenn-Air Cooktop - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
A plastic handle cracked and was loose.
I lifted off the broken handle and replaced it with a new handle. It worked.
Parts Used:
-
Donald from Half Moon Bay, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitor cracked and would not light
Simply removed the old ignitor and install the exact replacement part. Work great.
Parts Used:
-
Mark from Hendersonville, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
electrode would not spark
removed two screws, lifted the element, disconnected wire, removed one screw that holds electrode, replaced anf assembled
Parts Used:
-
Ronald from Sumas, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original knobs were broken. They are only plastic afterall and no did not hold on the stem to turn on and off without duct tape.
Simple. I went online, found the replacement part, ordered 5 new knobs. They came within 4 days and I put them on. Easy as can be. I saved this site so I can go back to it if I ever need to. Wonderful! Thank you..
Parts Used:
-
Tamara from Crown Point, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knobs split, was getting inaccurate flame
-
Robert from Alta Loma, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken electrode
First I tried twitching my nose....after I stopped sneezing I got a screw driver and put the new electrode in and gosh in gahiggy, it worked!!
Parts Used:
-
Douglas from La Habra, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas explosion due to bad Gas Pressure Regulator
First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the old unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again
Parts Used:
-
Charles from Buena Park, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench (Adjustable)
0 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner knob was cracked where it meets the shaft
-
Susan from Wilmington, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
20 of 610 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken burner knobs
So simple -- any monkey could do it. Pull off the old knobs and push on the new.
Parts Used:
-
Delton from Nevada, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 609 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knobs split and will not turn on burners
-
Daniel from Charlotte, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 609 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken knobs
We have had this appliance for 18 months. Within one month the first knob broke. A month later, the second knob broke. We have gently been using the remaining 2 knobs for 4 burner positions until recently when the other 2 broke. I am hoping these new knobs are made better then those that came with the appliance.
Parts Used:
-
Ginger from Hickory, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 609 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken knob to stove top.broken by me
First went to an appliance distrib. store.They would have to part.Was qouted a price.Wenthome and went online to partselect.com and saved 40% even with shipping.Got the part the next day!Pulled old knob off and pushed new knob on.Thank you for making it easy.
Parts Used:
-
Scott from Boca Raton, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 609 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a broken air vent knob on my range top.
The part was here three days after ordering and I put it on with no tools in less than a minure.
Parts Used:
-
Joan from Davis, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 610 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner knob got stripped out, taking them off and on...
Got on line and ordered part and lined up flat side of inside of knob and slid it on... That simple... The person who put them on after cleaning stove never knew there was a flat side inside knob.. We never stop learning, do we???
Parts Used:
-
Marv from Bella Vista, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
18 of 608 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace burner knob
with my own two hands, just slip it on--- no story.you folks came through quikly with no complications and deserve a compliment.
Parts Used:
-
Jacob from Coral Gables, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
18 of 608 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!