Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JED8430BDS > Instructions

JED8430BDS Jenn-Air Cooktop - Instructions

All installation instructions for JED8430BDS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JED8430BDS
16-30 of 64
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken control knob

  • Customer: Joseph from San Jose, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 15 of 41 people found this instruction helpful
Put new knob in place and threw broken one in trash/

Fan knob broke

  • Customer: Katherine from Arcadia, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 2 of 3 people found this instruction helpful
Read the other folks descriptions of how they pulled out the leftover parts with needle nose pliers after they figured that the new knob would not fit with those other parts still on the range top. Took the leap of faith, pulled the parts out until I got to the D knob and slid the new part right on.

Knob was broken and would not stay on.

  • Customer: Jim from BOERNE, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 1 of 1 people found this instruction helpful
I at first tried to put it on the stem but it would not go on and stay. I went to this website and read several instructions and realized i had to remove more of the old know. I took out the inside part but still no go. I them took out the outer sleeve and was able to install and works great. Don't be afraid to keep taking the old parts out until you are down to just the post. Wife is very happy now. Thanks

Broken knob fan

  • Customer: Linnaea from MOBERLY, MO
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 1 of 1 people found this instruction helpful
Item looked exactly as part to be replaced. Knob lifted out, used pliers to remove rest of Knob assembly then lined up the Dr shapes on Knob and cook top and snapped into place. Took all of 30 seconds to do. Knob looks exactly the same as the Knob it replaced.

duel burner operated on high only

  • Customer: Joe from Easton, MO
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 3 of 7 people found this instruction helpful
Disconnected fan from vent and raised cook top and rotated one quarter turn to rest on counter top so I could remove screws with 1/4 inch nutdriver in oder to lift cook surface from unit, then install new switch and reassemble in reverse order. Work perfectly!

Knob on the exhaust fan was broken

  • Customer: James from Sacramento, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 1 of 2 people found this instruction helpful
Simply removed old knob and replaced.

sticking/broken pop up knob

  • Customer: Robert from Northville, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 1 of 2 people found this instruction helpful
I used needle nose pliers to remove the broken piece then pushed the new knob on!!

Aged parts

  • Customer: Kathleen from Pottsville, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Parts aged from wear

Needed stove top cleaner and scraper

  • Customer: Doris from Camden-Wyo., DE
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Absolutely perfect, no problems

I didn't end up with the correct item

  • Customer: Gary from Dana Point, CA
  • Difficulty: Really Easy
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I ordered a switch and got a switch knob. So it is still not working.

Surface Burner Short

  • Customer: John from San Antonio, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Removed the cook top from the counter. Removed the switch housing and then the switch. Found a match and ordered. Part came in 2 business days. Once I put together the housing and connected the wire housing the burner worked perfect. The downdraft fan remained on. Placed a call to Jenn Air service and was asked to disconnect the fan switch. There must be some memory in the solid state portion of the switch. After a few mins I replaced the fan switch and hooked up the wiring. All worked fine.

replacement of broken knobs

  • Customer: Yulanda from Fairburn, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
open packaging and placed knobs on stems of the cooktop.

Fan swith poped out -couldn't replace it

  • Customer: Raymond from Long Beach, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Ordered new part--on line help said pull all remaining parts out--small pair of plyers and yanked internal parts out--the new part just slipped down over the u-post and back in business--couldn't have been easier

Water boiled over burnt out switch

  • Customer: Eddie from Loyall, KY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Knocked breaker removed stove top from iland removed a dozen screws replaced switch put screws back in installed top back in iland put breaker back in worked purfect.

Fan knob would not pop up as designed.

  • Customer: Raymond from Soddy Daisy, TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Removed old knob by pulling straight up. The shaft the knob fits on is D shaped. Simple align knob with D on shaft and push down. Problem solved.
All Instructions for the JED8430BDS
16-30 of 64