JDB7910AWB Jenn-Air Dishwasher - Instructions

The part is on the bottom of the washer. You have to remove the front panel at bottom (four screws)The part is on the left side of the washer. First thing to do is to remove the water inlet hose, using an open end wrench. There are two screws that hold the part to the sideof the washer. I used a multibit screwdriver with no bits in it, it the right size and works very good. Disconnet the electic from the part. Turn part so you can the see outlet hose & clamp, use a pair of plyers to open and slide the clamp up the hose, and pull the hose off the part. To reassmble reverse the procedure.To show how easy this is I'am a 76 year old man and had no trouble at all. The hardest part of the job was finding the leak in the first place

I followed the directions left by others - the wheel just snapped onto the rack - the handle was just as easy - unscrew all of the screws on the door, remove the broken handle parts and install the new handle. Very very easy repairs.

Easy- just ordered the new basket and swapped out the old one. the new one I received is sturdier and better made than the old one that the machine came with. I think I read somewhere the Maytag redesigned it because the original one did not hold up well. All repairs should be this easy!

Removed rack but had trouble removing the tower and didn't find any help in your video...finally just twisted it out.

Received the new basket within 24 hours of placing order.

Removed the rack by unlocking the slide stops on each end. That was a bit of a chore until I figured how to remove the stops. Then fairly easy. Removed the 2 small pivoting side rack attachments from the old rack and installed them on the new rack. Installed the new rack in the two sliding side rails and the job was done.

Took out the old basket, put in the new one. It fit perfectly. Part arrived in record time.

I took out the old basket and dropped in the new one. No tools were needed. I am really glad that PartSelect carries this item because Maytag does not. Getting this part will allow us to get a few more years of use out of the dishwasher. The bottom of the old basket was disintegrating to the point where it would soon have become unusable and without the replacement basket, the dishwasher itself would not have been worth keeping.

the replacement was easy, just have to pull the water jet out and attach to the new rack.

First I took apart and went to local appliance store. The wash impeller was broke for sure, but I could not figure how it worked. Their diagrams were not accurate and they only sold a kit for $40 just to get the wash impeller. I went online and found your site. I also could tell by your diagram(which was accurate) that the discharge pump housing was broke also. I found this on your site since it was under the problem I was having. I ordered the parts from you for $32 with shipping (included wash impeller and discharge pump housing). I received the parts on the second day, watched the video, and put back together. It works excellent. I am very impressed and will use your site for anything that breaks, and tell everyone about it. Thanks

It was fairly simple. I watched the video on the website that told me exactly how to install the part. I had some difficulty popping the part onto the rack so I enlisted the help of my son-in-law and he used a small screwdriver to pry the clamp open just a little and it popped onto the rack. It is so nice now to be able to pull the top rack out the whole way and slide it back in.

The wheels that originally were on the dishwasher were one piece, but the ones from the replacement were two parts. Snapping them together was a bit difficult,especially since I have nail extensions, but I was able to do it. Once that was completed, I snapped them on the side of the shelf as indicated in the schematics. Then, I put the rail stops on the back and installed the shelf. Finally, the front rail stops were installed. Dishwasher was back in action!

After receiving the part, opened the door, pulled the rack out, snapped the new wheel on and away we go. Job complete in a minute.

snapped right in

Ordered replacement basket, which was much sturdier and had nice center handle for lifting out. Very pleased with replacement part!