Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JDB6510AWP > Instructions

JDB6510AWP Jenn-Air Dishwasher - Instructions

All installation instructions for JDB6510AWP parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JDB6510AWP
586-600 of 711
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

spray arm would not stay in place

  • Customer: Gwen from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just snapped in plastic retainer and works just fine now

Part worn out, needed to replace

  • Customer: Ronald from Tulsa, OK
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
No repair, just an replacement. Would recommend this company for good service.

weak spray was leaving the dishes uncleaned

  • Customer: Edward from La Habra, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
removed the lower dish basket; used pliers to undo the lock screw. removed the lower spray arm, transfered heat shields from old part to new, replaced the lower spray arm, hand tightened the lock screw, replaced the lower dish basket....DONE!

Handle replace

  • Customer: James from Calabash, NC
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Handle was easy to replace and parts was prefect fit.

The door of my may tag dishwasher fell down

  • Customer: francesco from teaneck, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I replace 2 springs in 10 minutes works very nice. thank you.

Grinding on the drain cycle

  • Customer: michael from Kennesaw, GA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Saved me from buying a new dishwasher cost less than $100 completely fixed

The Plastic Wheel Broke From The Mounting Strip

  • Customer: LYNN from PUTNEY, VT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The plastic wheel broke from the mounting strip on the top rack. I removed the top rack, and the broken mounting strip. Just note that one side of the strip needs to be tilted before it can be removed. Clicked in the new wheel and mounting strip. Again, the side requiring you to tilt the strip goes in first. I was good to go in less than ten minutes.

lack of two wheels

  • Customer: Michael from Scottsdale, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replacement part has only 6 wheels. The original part has 8 wheels. The lack of the two extra wheels allows the dish rack to get stuck in the space between the inside of the dishwasher and the door. The extra set of wheels allows the rack to bridge the gap. It is a problem even if you put the rack in the other way around only a bit worse to deal with. The part was designed with four sets of wheels for a reason.

Wheel Mounting Strip cracked and wheel coming off, top rack kept falling off to the left.

  • Customer: richard from Seattle, WA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
typed the model # in Google, selected your company. found the model right away. watched the repair video and ordered my parts. came in no time. as the video showed, removed the old broken wheel mounting strip and installed the new mounting strip and the new wheels. wahla - good as new! piece of cake!

broken silverware basket

  • Customer: dixie from shawnee mission, KS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took old one out and put new one in.

wheels on lower rack needed replacement

  • Customer: Lisa from Great Falls, MT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
the repair took all of 5 minutes; the wheels snapped on very easily.

Broken wheel mounting strip--top rack sagging

  • Customer: Tamara from Fairfax, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Unclipped end caps. Pulled out rack. Removed mounting strip by sliding until v aligned. Installed new strip. Pushed wheels onto strip. Replaced rack and clips.

Silverware basket replacement

  • Customer: Mike from Wheat Ridge, CO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The silverware basket in my Maytag portable dishwasher was pretty flimsey. The replacement basket I got here seems more durable and I'm very happy with the quality. Shipping was fast and it was packaged very well!

The new parts were not identical to the old parts

  • Customer: Roger from Sparks, MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
By careful thought I managed to make everything fit.

Bad washing, spotted dishes, water finally stopped filling

  • Customer: Timothy from Wakeman, OH
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Disconnect power. Turn off water supply. Removed front lower cover (4) screws. Disconnect solinoid quick connectors. Remove/disconnect inlet water line. Remove outlet hose. Remove mounting screws. Replace valve.
All Instructions for the JDB6510AWP
586-600 of 711