Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JDB6510AWP > Instructions

JDB6510AWP Jenn-Air Dishwasher - Instructions

All installation instructions for JDB6510AWP parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JDB6510AWP
571-585 of 711
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Not cleaning properly due to clogged parts.

  • Customer: Maurice from Wappingers Falls, NY
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I disassembled parts from the lower Spray arm to the Rinse Arm. Everything was gunked up, nothing was broken. I replaced the Lower Spray Arm, Secondary Filter, Pump Housing Filter and the Rinse Arm. I re-used The Radiant Shields, Filter Plate, Lower Spray Arm Seals and the O-Ring. Much of my time was spent cleaning before re-assembly. Assembly was no problem. I ran the machine afterward with no problems and very good cleaning results. I ran the videos once before starting. They were very helpful, as were some other people's experiences.

Bottom of basket was cracking and silverware were falling thru.

  • Customer: Nathan from brooklyn, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Please be aware the basket shown on this site is the original basket that came with the dishwasher. The basket they sent is not original. It is the dark grey basket found on every other site when searching for this item. You can save yourself some cash buying this non original basket from at least a half dozen other sites.

Rusted rack

  • Customer: Hank from La Habra, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The Whirlpool page had a link to a YouTube step by step instruction with pictures. The dish rack stop was very non intuitive - without the YouYube, it would have been impossible

Drain pump wouldn’t stop running.

  • Customer: steve from ramsey, MN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Eventually the Pump started making a lot of noise.
Replaced float switch, (Tells the pump to shut off when empty) initial problem fixed.
Pump running dry caused upper pump housing failure, replaced pump housing, no more noise.

Wife Heard Loud Noise. She Thought A Helicopter Was Landing On The House.

  • Customer: Charles from Manchester, TN
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
First, I went to the "partselect" web site and searched for "loud noise". The web site listed the probable cause and had a video about how to remove the discharge pump housing. I removed the housing and found it in two pices. Ordered the part and received it in 2 days. I had to watch the video again to make sure I replaced the parts in the correct order. Wife is now happy and that makes me happy. Thanks to "partselect" for your help.

basket broken

  • Customer: William from Brockport, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
out with the old in with the new

Top right hand wheel gadget needed to be replaced

  • Customer: SHIRLEY M. from WEYMOUTH, MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
Watched video you have on the site.... also read the first person's description - both very helpful...since I am 75 y.o.and a woman got my chair to sit and did exactly step by step and actually did it! So happy I wouldnt have to buy a new dishwasher YET - Emailed my friends and said if and when they need wheel replaced I can do for them!!! Thanks for all the help on site.

Plastic door handle broke off

  • Customer: John F from Pawleys Island, SC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Removed screws on the back of the D/W door, remove existing screws from broken part, screwed the new handle into place, replaced the screws on the D/W door. Probably saved $60 - 75 for a service visit.

grinding

  • Customer: Kelly from Muskegon, MI
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
followed your video awesome site thanks

Rusted bottom rack bowl/plate holder

  • Customer: Katherine from Grand Ledge, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Rusty part snapped out, new part snapped in! No tools, less than a minute from start to finish

Noisy dishwasher

  • Customer: Thomas from Knoxville, TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Took apart per video on Part Select found broken piece. Ordered new part and replaced 4 days later.

bottom of basket was broken

  • Customer: donald from arnold, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
replaced basket with a new one, so easy even a cave man could do it.....i think.......

would not pump water in the machine.

  • Customer: Della from Nauvoo, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
look the instrution on line and it worked great.

old broken silverware basket

  • Customer: Vincent from Laurel Springs, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I put the new one in and that was all

Heard a grinding noise when the dishwasher was running

  • Customer: Robert from Key West, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I twice watched the 5 minute video on PartSelect on how to repair the Discharge Pump Housing. I disassembled as instructed. One thing I did that the video did not suggest is that I marked the alignment of all parts with a pencil before removing any screws. In the end it only mattered on the main housing that covers the filter. That has to be put back on the way it came off. The repair is complete and for under $50 the dishwasher is running great and quieter than I can ever remember.
All Instructions for the JDB6510AWP
571-585 of 711