JDB1250AWP Jenn-Air Dishwasher - Instructions

Just ordered a new one, which came VERY quickly, and put it in!

Saw the replacement part on your website, ordered it, we cleaned the location where it fits, pressed it on for a neat clean fit. It took no more than five minutes. It saved us calling a service engineer that would have probably cost us over $100 with the part. We fixed it for $25. Thanks PartSelect for prompt and efficient service.

I removed the leaking valve and installed the new one it was pretty easy

Unplugged the power cord and removed front toe kick panels. Used a small mirror to see the location of the screw holding the float switch in place and removed the screw, disconnected the float from inside the dishwasher removed the float switch and replaced. It was a simple repair and so far seems to have solved the leaking problem. There was some unusual wear to my old float and the switch looked like it may have been leaking a small amount as it had lime build up on the switch lever. The part came with an easy to follow instruction sheet. PartSelect has saved me money on repair work I thought I would not be able to do myself. The website is very helpful in resolving what he problem may be and what parts are needed. Fixed four other appliances using this site over the past few years and they ship quick.

Checked to see if the disposer was stuck or sprayers filled with food. They were clean so I listened and checked to see if the sprayers were spraying while the dishwasher was running. It was not. Checked online for answers and they said that there might not be enough water in the dishwasher since it did not fill appropriately. I added water during the cycle and then the sprayers were working properly until it drained and filled again. Installed the new water inlet valve and all works properly now.

followed directions (boring, I know, but it works) on the accompanying video. simple

Lifted Float out....Located Float switch ...replaced

Easiest ever. Recycled the old one and put the new in its place. We are trying to place the silverware in, rather than dropping it in. It was suggested in the video from this website.

Replaced The part. Picked up the old one and repurposed it in the work shop and dropped in the new one ...no tools needed. The real story here is that this web page existed and I was able to get the exact replacement part I needed delivered to my house.Piece of cake,

Replaced silverware basket. Works as designed. Speedy part delivery and great service!

Removed the broken part, replaced it with the new one and we were good to go.

Part was extremely easy to find. Part arrived very quickly and fit Perfectly. Easy repair.

Slid washer out from cabinet after disconnecting drain hose from garbage disposal and unplugging from electrical outlet. Was necessary to lay washer on side to disconnect drain hose from the dishwasher. Have towels ready as you will likely have some leftover water in hose & dishwasher. Used tape to secure insulation pad to washer so it would not catch on the side and top of cabinet when sliding back in place. Easy fix.

Opened the box and put the new Silverware Basekt in the Dishwasher. Everything was atttached, no labor involved. Loved it, wish I had thought about ordering it earlier. Ordering, Receiving and Installing was EASY and QUICK. Thank You!

All steps were easy except the Maytag layout made it hard to get to the fittings to remove and reconnect the water line. After that we just moved the dishwasher from beneath the counter and laid it down on the front. Removing and testing the old heater element was easy. The hardest part of installing the element was the odd clips inside the dishwasher. I need to return the o-ring and nuts because you included them with the heating element.