Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JDB1100AWS > Instructions

JDB1100AWS Jenn-Air Dishwasher - Instructions

All installation instructions for JDB1100AWS parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the JDB1100AWS
256-270 of 422
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Igniter was broken

  • Customer: Richard from Hoffman Estates, IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 5 of 75 people found this instruction helpful
I read the notes from the other parts select customers and followed their directions. #1 remove the front of the dryer(2 screws less than 5 minutes)#2 unplug and detach the old igniter ( disconnect the plug, remove 1 screw with a 1/4"socket 5, minutes ) Vaccuum out the accumulated lint and dirt. ( not all that much 5 minutes ) #3 attach new igniter and plug it in (2 minutes) #4 turn on the dryer to make sure I have solved the problem ( I did ) #5 re install the front ( under 5 minutes )

Silverware basket was broken

  • Customer: Sandra from Caro, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Part was extremely easy to find. Part arrived very quickly and fit Perfectly. Easy repair.

Cracked drain hose

  • Customer: Jack from Miami, FL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Slid washer out from cabinet after disconnecting drain hose from garbage disposal and unplugging from electrical outlet. Was necessary to lay washer on side to disconnect drain hose from the dishwasher. Have towels ready as you will likely have some leftover water in hose & dishwasher. Used tape to secure insulation pad to washer so it would not catch on the side and top of cabinet when sliding back in place. Easy fix.

Silverware Basket had holes in the bottom where silverware fell through

  • Customer: Debi from Chico, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Opened the box and put the new Silverware Basekt in the Dishwasher. Everything was atttached, no labor involved. Loved it, wish I had thought about ordering it earlier. Ordering, Receiving and Installing was EASY and QUICK. Thank You!

Our dishwasher was not heating up to dry dishes

  • Customer: Claude from Helotes, TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
All steps were easy except the Maytag layout made it hard to get to the fittings to remove and reconnect the water line. After that we just moved the dishwasher from beneath the counter and laid it down on the front. Removing and testing the old heater element was easy. The hardest part of installing the element was the odd clips inside the dishwasher. I need to return the o-ring and nuts because you included them with the heating element.

Sandy looking grit in the bottom of some of the glasses and cups.

  • Customer: Emma from Plano, TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Followed the directions on the video. Repair went well, but did not solve the problem.

Broken plastic wheel upper tray

  • Customer: Jerry from Pine Grove, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simply removed the broken wheel mount from the tray and replaced it with the new part. Then pulled the support slider out and removed the end cap. Inserted the wheel into the slider, pushed it and the tray in far enough to re-insert the end cap, and pushed the tray in. The whole proceedure took less then 5 minutes.

rinse water very dirty leaving crud on dishes

  • Customer: jeremy from kankakee, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I first ran a cycle of clear glass to verify that there was something wrong. I pulled an exploded parts diagram off the internet to see what parts there were and to give me an idea how everything came apart. I slowly took piece by piece< keeping all screws seperated with the part they belonged with. I set the parts in the order they came out so I knew what way they would have to be returned to the machine. I cleaned and inspected all parts to ensure they were in working order. When I removed the accumulator filter I noticed all the screens were caked with what appeared to be soap scum. I then noticed one of the screens was tore away from the filters body about a half inch long. I decided to order the part(which was a sunday). The part was on my door step by tuesday morning( with standard shipping). I had the part reinstalled in 10 minutes. The hardest part of the whole job was getting all the slats on the filter to line up with the ones on the cover to be screwed onto it. They need to be lined up or the screws will not go in properly, which would be a whole different bag of worms. The job was seriously simple and the ease of ordering and receiving the part made it that much better. Thank you for being a great service to the service industry.

after wash cycle there was water in bottom of unit

  • Customer: kent from central city, NE
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
took off drain hose pulled out flapper on the pump side and installed new one then put everything back together

Dishes weren't coming clean cause the water wasn't staying hot.

  • Customer: Jesse from Delavan, WI
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
To be honest it was a very easy repair it actually took longer to disconnect and remove the dish washer from the cabinet than it did to install the heating element. Be sure to have towels ready cause when you tip the dish washer on its front to remove and re install the heating element water will leak out on to the floor.

silverware basket had a hole in it

  • Customer: Kathy from Pasadena, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just replaced the old one with the new one. Now we don't have to avoid the little section that had the hole and I'm much happier since I couldn't get my family not to put silverware in the section with the hole! :)

Bottom On The Old Basket Gave Way

  • Customer: JOHN A from SWANTON, OH
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Bought the replacement silverware basket (gray) and it fit perfect and works just as good if not better than the old one. All I did was take it out of the box and that was that. Thanks again.

damaged silverware basket

  • Customer: Robert from Crescent, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Opened the shipping box, removed the basket, opened the dishwasher, removed the damaged basket from the dishwasher, placed the new basket in the dishwasher and closed the dishwasher door. Wife said I was a genius.

The dishes had grime on them. The filter was torn.

  • Customer: Lisa from Vista, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the old filter and installed the new one.

None

  • Customer: Robert from Galveston, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Installed lower basket in 5 minutes
All Instructions for the JDB1100AWS
256-270 of 422