All Installation Instructions for Whirlpool Cooktop ICS300RQ01

Top burners would not light. No "clicking" .

My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!

Parts Used:

Spark Module

Carolyn from Bellingham, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

21 of 33 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

gas burners would not automatically light when gas turned on

I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as she had been using matches and burning her finger tips,since the original range part malfunctioned. The only problem was the small screw from the original installation was not long enough , so it required some changes to get it affixed to the cabinet side.Thanks for the reasonable price and the right part for the job!!

Parts Used:

Spark Module

MICHAEL from LONGVIEW, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

12 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

One of the burners was not igniting.

We replaced the part. It was pretty quick and easy to install.

Parts Used:

Spark Module

Sandra from ASTORIA, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Spark Module malfunction, won't spark

Removed back upper cover, unscrewed retaining screw from module. As noted in a comment from another do-it-yourselfer, I replaced screw with a longer one and reinstalled module. Note that the replacement part is not exactly the same as the old one(the wires are located differently), I noted the wire color codes with the slot number and reinstalled them in the same slot number. Works fine.

Parts Used:

Spark Module

Darrel from Kewaunee, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

igniter short circut

Replace igniters

Parts Used:

Igniter Switches with Harness

Jim from Grove City, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

15 of 35 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Stove top did not come with a gas regulator and nipple attachment

A plummer did the repair.

Parts Used:

Pressure Regulator

Linda from Colorado Springs, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

12 of 42 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

no spark on stove top (gas)

Repair was super simple . Any one could have done it.

Parts Used:

Spark Module

larry from Boulder city, NE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

change over from Natural Gas to LP and install cooktop from Electric to gas

removed old electric cooktop and install gas line and gas cooktop and change from natural gas to LP remove and replace orifice with new ones from kit, my cooktop called for 2 black orifices in the two small burners but did not come in the parts kit that I orded so I used 2 red orifices and it seems to work just fine.

Parts Used: