Switch to Classic
Models
>
HU700F
HU700F (2012-11 - 96145000900) Husqvarna Lawn Mower - Overview
Sections of the HU700F
[Viewing 2 of 2]Keep searches simple, eg. "belt" or "pump".

Wheel Adjuster Kit - RF/AWD
In Stock
PartSelect #: PS11824351
Manufacturer #: 581497908
This part is used to move the mower deck up or down to the desired lawn mowing height.
$17.84


Cover, Dust, Wheel
In Stock
PartSelect #: PS9982436
Manufacturer #: 581840401
The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will...
$5.09


Bolt, Handle
In Stock
PartSelect #: PS9014802
Manufacturer #: 532191574
This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened b...
$3.81


Lawn Mower Blade
In Stock
PartSelect #: PS11824277
Manufacturer #: 580244002
(22-inch Deck)
This 4-in-1 blade is for lawnmowers.
The 4-in-1 blade combines the features of a high-lift blade with a mulching blade for bagging, discharging, mulching, and shredding leaves. T...
$25.49


Lawn Mower Blade Adapter
In Stock
PartSelect #: PS9982357
Manufacturer #: 581473301
This blade adapter is for lawn mowers.
Blade adapter 581473301 attaches the mower blade to the motor shaft.
Disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
$14.02

Questions And Answers for HU700F
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socket. It was a very easy repair.
Parts Used:
-
Russ from ALTENBURG, MO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!