Models > HEI8054U

HEI8054U (03) Bosch Range - Overview

Sections of the HEI8054U

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
SHELF – Part Number: 00798845
SHELF
PartSelect #: PS9495699
Manufacturer #: 00798845
$57.18
  In Stock
SLIDE – Part Number: 12024638
SLIDE
★★★★★
★★★★★
(1)
PartSelect #: PS12587595
Manufacturer #: 12024638
$79.02
  In Stock
LAMP – Part Number: 00623710
LAMP
PartSelect #: PS8728930
Manufacturer #: 00623710
$7.70
  In Stock
DISPLAY MODULE – Part Number: 12029207
DISPLAY MODULE
★★★★★
★★★★★
(2)
PartSelect #: PS12742171
Manufacturer #: 12029207
$199.69
  In Stock
SENSOR – Part Number: 00630873
SENSOR
PartSelect #: PS10057828
Manufacturer #: 00630873
$43.54
  In Stock
Bake Element – Part Number: 00791650
Bake Element
PartSelect #: PS9495682
Manufacturer #: 00791650
$92.16
  In Stock
ENERGY REGULATOR – Part Number: 00422133
ENERGY REGULATOR
PartSelect #: PS8713176
Manufacturer #: 00422133
$66.02
  In Stock
GLASS PANEL – Part Number: 00791632
GLASS PANEL
PartSelect #: PS9495679
Manufacturer #: 00791632
$159.36
  In Stock
HOB TOP – Part Number: 00771675
HOB TOP
★★★★★
★★★★★
(2)
PartSelect #: PS9495674
Manufacturer #: 00771675
$278.15
  In Stock
LENS – Part Number: 00414513
LENS
PartSelect #: PS8710323
Manufacturer #: 00414513
$24.62
  In Stock
DOOR-OUTER – Part Number: 00771361
DOOR-OUTER
★★★★★
★★★★★
(2)
PartSelect #: PS9495668
Manufacturer #: 00771361
$333.56
  In Stock
FOOT – Part Number: 00429065
FOOT
PartSelect #: PS8714363
Manufacturer #: 00429065
$30.03
  In Stock

Questions And Answers for HEI8054U

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Need to replace bake element
First, cut the power and remove the oven from the cabinet.

The bake element is accessible from the back and sits in a drawer.

As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.

Make a note of what wire goes to the right and to the left so you can plug them back like it was before.

When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.

To close the cover that you bent, you will need a helper and push really hard.
Parts Used:
Bake Element
  • Ludovic from MIAMI BEACH, FL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control panel would randomly flicker, fade to black or become non-responsive when subjected to the heat/steam of the open range.
Watch the YouTube video.
Turn off power or unplug the range.
Remove 5 gas control knobs.
Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R.
Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness.
Carefully remove two wiring connectors (pinch and pull method)
Remove four T20 screws securing the Control panel mount then turn it over 180 degrees.
Straighten the mounting tabs until the control panel easily slides off of its mount.
Remove and replace the control panel and sheet.
Reverse the procedure to reinstall.
It took me longer to clean the components and the area that to repair the problem.
Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
Parts Used:
DISPLAY MODULE SHEET
  • Alan from COLUMBUS, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced cracked glass top on range
My repair man was able to change out the old, cracked top and replace it with the new one in less than an hour. The wires underneath were pretty straightforward, but he mentioned that the burns were off and he adjusted. Wanted to mention that it was an easy adjustment. Also, other reviews mention needing two people for this job. I had to help once in placing something under the cooktop while he adjusted a burner..otherwise, it was all him. Everything arrived in great condition and was securely packaged from PartSelect (thank you!).
Parts Used:
HOB TOP
  • Leslie from FOSTER CITY, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!