HDA3400G02WW Hotpoint Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rusted out Tray
Rolled the old one out and rolled the new one in. I plan to replace the top rack next, best parts experience I have ever had.
Parts Used:
-
James from Loxahatchee, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old pump leaking
The motor/pump Kit I purchased could fix/be installed in any GE dishwasher made since 1970. I would guess that the one I have is about 15-20 years old. I encountered only one small problem with the kit------ a motor hanger that had to be bent a bit to fit correctly. Other than that it was a total breeze. The clear instructions included in the kit helped quite a bit. In 30 minutes or so ,I was done and our machine was back in operation
Parts Used:
-
Mimi from Philadelphia, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
axles broken
-
Aaron from Stafford, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Wheels on the lower rack keep falling off.
Wheels snap on and off. Snap off old and snapped on new wheels with my hands. No Problem.
Parts Used:
-
Grady from Canyon Country, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dishwasher stopped working
knew the cause of problem ordered parts prompt delivery 16 yr grandson did the repair with little or no assistance
Parts Used:
-
robert j from elpaso, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Leaking motor seal
Followed easy instructions and completed repair in less than 30 minutes.
Parts Used:
-
Robert from Willcox, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Plastic coating wore off the posts
-
George from Painesville, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was not draining
I removed the basket in the back of the dishwasher and unscrewed the plastic piece under the basket. I quickly screwed in the new one and now my dishwashe ris working perfectly.. We came so close to buying a new dishwasher and I am so happy I found the website describing this part. THANK YOU!!!
Parts Used:
-
Wendy from Kingman, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
upper roller broken
Pretty much a no brainer, took longer to remove rollers from packaging than actual replacement.Most impressed with customer service and the speed of delivery.
Parts Used:
-
Jorge from San Ramon, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Rollers on top rack worn out
It was easy, we just snapped off the old rollers and replaced with the new. Just like that.
Parts Used:
-
Laura from Escondido, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water was leaking from the inlet valve
the repair would have been much easier but the screws from the old inlet valve did not match the size of the holes on the new valve.
Parts Used:
-
John from Havertown, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set
Was this instruction helpful to you?
Thank you for voting!
dish washer rack was rusting
-
Priscilla from Houston, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Upper roller and axle too old, would not allow top rack to slide
Took top rack out of dishwasher, took off rack slide end cap, took off roller and axle parts, then replaced with new. Fantastic, easy, and sooo much cheaper than replacing the entire dishwasher. Thank you GE for the convenience of repairing my own dishwasher AND THE PARTS CAME WITHIN 2 DAY.
Parts Used:
-
Carla from Stockport, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dishwasher door switch
unplugged old switch and installed new one. it took 5 minutes to do. 20.00 saved me 400.00 on a new washer.
Parts Used:
-
anthony from easton, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Wouldn't clean upper rack, not enough water
Checked the water supply to the inlet valve - OK, pulled the filler hose from the outlet side of the valve and checked flow in wash cycle. Results, less than 1/2 gallon. Checked your website, found 94% sucess rate by replacing the valve, so I ordered one. It took about 10 minutes to install with a nut driver, 6" adjustable to connect water supply, and plier to hold outlet clamp open to install it; now we look forward to dirty dishes rather than dumping water into the machine it takes care of itself and we once again get sparkly cups andglasses of the top rack. OU- Rah!!
Parts Used:
-
David from Nespelem, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!