Quick Question!

Have you ever purchased from PartSelect.com before?

Models > HDA1030M25WA > Parts

HDA1030M25WA Hotpoint Dishwasher - Parts

All parts for the Hotpoint Dishwasher HDA1030M25WA

Below is a list of all parts for the Hotpoint Dishwasher HDA1030M25WA. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the HDA1030M25WA
1-14 of 134
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$0.79

RACK SLIDE END CAP

The rack slide end cap is the part that attaches to the rails of your upper dish rack and prevents the dishrack from sliding too far. If you find the dish rack is causing the door ...

$22.37

Lower Rack Wheel Kit - 8 Pack

This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when operating, or the dishes are not cleaning properly, you might need to replace one or more of the wheels. Each wheel and axle are made of plastic, and fit into one another so they can be clipped on to the lower dishwasher rack. Many of our customers found this repair to be quick and easy, and the only tool you should need to complete the repair is a pair of pliers.

$11.92

Upper Roller and Axle - Kit of 4

The dishwasher roller assembly attaches to the dishrack located in the upper level of the dishwasher. It allows the dishrack to slide and roll easily. If the upper rack keeps falli...

$8.72

Corner Tub Baffle - Lower Left

The corner tub baffle may also be known as the door baffle and is a part used on your dishwasher. The left and right side baffle on your dishwasher should be installed and replaced at the same time. This specific part is for the lower left side of your appliance, the right-side is sold separately. The function of the tub corner baffle is to prevent water from leaking through your dishwasher door. The function of this specific one is to stop water from leaking through the bottom left hand side of your dishwasher door. You will not need any tools to make this installation.

$8.82

Corner Tub Baffle - Lower Right

This baffle fits the lower right hand corner of some dishwashers. It is black rubber and has a matching left hand lower corner baffle. It is recommended that you replace and instal...

$16.43

Silverware Basket

The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you should replace it with this part. No tools are required as it is an easy replacement. If you need further guidance refer to the instructions provided by the manufacturer. For safety precautions make sure to unplug the dishwasher and wear gloves.

$10.90

Lower Front Dishrack Wheel

The lower dishrack wheel on your dishwasher allows the dishrack to roll in and out effectively. If your lower dishrack wheels are damaged, or the rack does not roll in and out, you...

$12.05

Interlock Switch

The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. The interlock switch senses the door is shut and the dryer can begin. This part might need to be replaced if your dryer is not starting or is in process while the door is open. The black rectangular part of the switch is approximately 2 inches long and a 1/2-inch wide with two gold plates on either end. This is a genuine OEM part that is sourced right from the manufacturer.

$19.44

Drain Valve Shaft Seal

The drain valve shaft seal is a part for your dishwasher drain pump valve. This seal creates a watertight closure around the flapper valve shaft. This part can be accessed through ...

$3.60

Push On Nut

$9.95

Door Cable and Eyelet

This part is sold individually. It is recommended that both sides are changed when replacing one.

$5.29

White Track Roller Kit

The track roller on your dishwasher allows the tracks that hold the upper dish rack to slide in and out effectively. If you notice that your upper dish rack is struggling to slide in and out, you may need to purchase a new track roller kit to replace the damaged one. This kit comes with the roller, one screw, and a washer for easy assembly. The roller is approximately 1-1/4 inches in diameter and the screw is approximately 1-1/2 inches in length. To complete this repair, you will need to remove the upper dish rack, as well as the rail.

$10.64

Rinse Aid Fill Cap

This part helps keep the rinse aid the dispenser until its needed.

$26.40

Water Inlet Valve

This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

All Parts for the HDA1030M25WA
1-14 of 134