Switch to Classic
Models > GWT700AW > Instructions

GWT700AW Haier Washer - Instructions

All Instructions for the GWT700AW
1 - 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Pump drain blow out.
My wife tells me the washing machine is not completing its job, so i looked at it and notice it stopped when it hit the rinse cycle and it error E1. I checked the drain pipe it was fine, I checked the drain filters, they were fine, I checked the current to the pump drain with my volt meter and there was power. "Got to be the pump". So I looked everywhere to figure out what was E1 couldn't find anything on the web, goofy me should of just called Haier... it seemed they only wanted to send out a service man "which I didn't want" so I just asked what was E1 and they just said it was a drain problem that is all, big help... but at least I narrowed it down to the pump drain. I looked on the web to find the part and led me to Part Select web site. I just put my model # down and boom gave me a list of parts that are usable for my machine even though they were made from a different company. I called to verify about the part and sure enough someone answered the phone very fast and answered all my question. Reassured about the part so I purchased it. Got it in the mail amazingly fast my wife was freaked out about it lol. So I put the part in and BOOM all is well did all the accumulated laundry in one night. I'm one happy guy. P.S. I'ts been almost a week and it's still working we got kids and dogs so we use this machine everyday.
Parts Used:
PUMP DRAIN
  • Hector from Palmdale, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GWT700AW
1 - 1 of 1