GSL25JFTABS General Electric Refrigerator - Instructions

We watched the video on your web site and was very helpful. We ordered the part from your site was here very quickly. It took us about Fifteen minutes to replace. Saved us alot of money. Thanks so much for all your help.

it was easy the only thing was i had to cut old harness to remove 2 wires that went to coil that had to go back in the new harness other then that a peice of cake.

Everything went really smooth. Just watched the video on the computer. Took it apart and put it back together with no problems at all.

Watched the utube video on repair then followed it during repair. That made it easy

Watched à video provided at your website. Removed te cover then removed 4 screws holding the control panel' snapped out the old flap and inserted the new one.

unscrew filter and replace the new one

Watched the video that showed how to disassemble the ice maker. Then went right in and replaced the part and turned it on. It immediately started filling up the ice tray. I still have not been able to find out why it does not make as fast as the original ice maker. The tempeature for the freezer is set pretty cold.

Followed instructions on Installation Video and had no problems completing the installation. This from a 63 year old women!

Just ordered the complete basket with augar took out old and replaced it with new one.

Took the ice bucket out and had to disassemble it completely to get the old auger end out of the grinding blades at the front of the ice dispenser. That part was kind of tricky because I was just using pliers to hold the blades while I got the lock washer off the plastic threaded piece that the auger screws into. Make sure you keep those blades in the precise order they come off, along with the plastic bushings that go in between some of them. Once I got the old auger free of the plastic end piece it went pretty quickly from there. I could never get the new auger to screw cleanly into that plastic end piece. It kept cross-threading so I just shoved it back on and it seemed to be snug enough. I've been using it for a couple of weeks and it is doing great.

I replaced the Defrost Timer & Defrost Thermostat previously only to find that the freezer was still freezing up. It was obvious that the Defrost heater was bad and I ordered it. I had ignored Parts Select reccommendations on my first order otherwise it would have been less than 30 minutes to complete all of the repairs. It took longer to defrost the freezer coils than the actual repairs took. I followed the published installation from Parts Select and now my 10 year old side by side is working like a new appliance. Thanks Parts Select for the fast shipping and accurate replacement instructions. Jim from Virginia, you get 10 stars from me!

Watched the video on how to repair this problem. Folowed the simple instructions and it worked. The double outlet water valve worked as it should. When I tested the water dispencer nothing came out of the spiggot on the door but water poured out all over the floor because the 5/16" water line from the replacement valve to the front of the refrigerator was brittle and cracked. I've ordered the part. Moral of the story - if your are replacing this double outlet valve, buy the water line and the union for the dispencer. You'll save yourself time, postage and effort. From the looks of it sooner or later the water line gets "cooked" and breaks/cracks.

It was very simple. I took the drawer and glass out. Unscrewed the old rail and screwed in the new one.

I utilized your other tips on your website and they worked very well. Only problem, I ordered a part that I did not need, but I returned the part to you and your return policy worked well. Thank you for your support.

My husband made the replaced the flapper while watching the video provided in your email, it was easy. Thank you.