Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GS2728GEHQ

GS2728GEHQ Maytag Refrigerator - Overview

Get Parts and Repair Help for GS2728GEHQ

If you know the refrigerator repair part you need, you can browse the list of all parts on the GS2728GEHQ, or you can search by name or part description. You can also find your part by where it is located on the GS2728GEHQ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GS2728GEHQ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.96

Screw

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this sc...

Order within the next 5 hrs and your part ships today!
$4.88

Screw

Sold individually.

Order within the next 5 hrs and your part ships today!
$5.27

Lower Hinge Pin

This is a lower hinge pin for your refrigerator door. This hinge helps your door open and close easily by allowing it to pivot. You will need to replace your lower hinge pin if you...

Order within the next 5 hrs and your part ships today!
$5.47

Crisper Drawer Shelf Support

This crisper drawer shelf support is used for many refrigerators. It is all white in color and is made entirely of plastic. This shelf support is less than an inch long.

Order within the next 5 hrs and your part ships today!
$24.22

BLADE-FAN

The fan blade is used to blow air over the condenser.

Order within the next 5 hrs and your part ships today!
$2.96

Screw

Sold individually.

Order within the next 5 hrs and your part ships today!
$12.36

Ice Door Assembly

This ice door assembly is a little over three inches in diameter. It is all white in color and it is made entirely of plastic.

Order within the next 5 hrs and your part ships today!
$69.34

FILTER7, SINGLE

Order within the next 5 hrs and your part ships today!
$15.38

Limit Switch - 2 Terminal

This limit switch, also known as a dispenser switch, is used in refrigerators and freezers. The function of this part is to control the dispensing of ice or water when the dispense...

Order within the next 5 hrs and your part ships today!
$2.96

Roller Screw

This screw is less than an inch long, and is made entirely of metal. It is used for the roller of many Maytag brand refrigerators.

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Bearing Cup Assembly was broken and ice would jamb against it during the ice making cycle.

  • Customer: David from Chester, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 96 of 116 people found this instruction helpful
I removed the ice maker from the refrigerator, by removing one screw on the underside bracket and loosening the two screws at the top side, then lifting the ice maker off the loosened screws. I then unplugged the electrical harness that supplies power from the refrigerator to the ice maker. I then disassembled the ice maker by removing the front cover whic... read more

Refrigerator Filter needed replacing

  • Customer: Bruce from Alfred Station, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 87 of 97 people found this instruction helpful
Turn counter clockwise, following the remove arrow on the filter, until it stops. Wiggle and pull down on the filter until it comes off. Put date sticker on new filter to remember when it was replaced. Align the lines on the filter and push it up where the old one was and turn it clockwise until it stops, following the install arrow. Close the door and p... read more

Ice maker and water dispenser would stick on. Would have to oprn door to stop flow of water or ice

  • Customer: David from Springdale, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 81 of 89 people found this instruction helpful
I replaced the actuator switch and rubber pad with the switch actuator.
I had attempted to repair previously without replacing the pad but the problem continued. I put up with the problem for a long time waiting for the opportunity to get to the appliance parts store but their hours are hard to deal with and work myself. I was able to find the part eas... read more