GLSG62RFW0 Gibson Washer Dryer Combo Parts & Repair Help | PartSelect
We’re open and continuing to ship packages, however we are experiencing shipping delays. Call volumes are high, please use our self-serve options to cancel or return your order. Learn about our response to COVID-19
Models > GLSG62RFW0

GLSG62RFW0 Gibson Washer Dryer Combo - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(22)
PartSelect #:PS470317
Manufacturer #:5303937139
The upper drum glide is attached to the front panel of your dryer, you can locate it by removing the top portion of your dryer. The drum glide allows the drum to rotate with ease a...
$26.92
In Stock
(16)
PartSelect #:PS418807
Manufacturer #:131825900
If your dryer does not tumble, will not start, is noisy, or is leaving marks on your clothing, you may need to replace the drum support bearing. The drum is supported at the rear b...
$4.05
In Stock
(21)
PartSelect #:PS1146950
Manufacturer #:134511600
This rubber V-style drive belt slips on the motor pulley to bring the basket to the required speed. If you notice a burning rubber smell or grinding noises coming from your washer,...
$16.38
In Stock
(3)
PartSelect #:PS460194
Manufacturer #:5303283286
The front lower drum seal is used in the assembly of dryers. This seal helps keep your appliance running quietly. It allows the drum to smoothly rotate on the front panel. If you n...
$29.48
In Stock
(19)
PartSelect #:PS12585473
Manufacturer #:5304516871
This dryer lint screen is for laundry centers. Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer. Follow the instructions in the owner's manu...
$33.00
In Stock
PartSelect #:PS3408299
Manufacturer #:137292700
The multi-rib drum belt is also known as a drive belt and is a part for your dryer. The function of the drum belt is to attach to the motor pulley. It will then spin the drum as th...
No Longer Available
(5)
PartSelect #:PS418888
Manufacturer #:131858004
Sold individually. This white knob accepts a D-shaped shaft.
$32.71
In Stock
(12)
PartSelect #:PS418433
Manufacturer #:131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, w...
$36.05
In Stock
(22)
PartSelect #:PS470049
Manufacturer #:5303931775
This kit contains two coils, one is a two-wire secondary coil and the other is a three-wire booster coil. Both coils in the ignition coil kit should be used together in the clothes...
$18.66
In Stock
(11)
PartSelect #:PS7783938
Manufacturer #:137221600
This is a 120 volt, 60 hertz drain pump that is manufactured to remove water from the tub of your washer once your clothes are washed. This part is the pump and motor assembly, whi...
$111.73
In Stock
Questions and Answers for GLSG62RFW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replace broken drive belt

Drive V-Belt – Part Number: 134511600
  • Customer: rodney from fairfield bay, AR
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 253 of 279 people found this instruction helpful
carefully pry up on front washer top to release plastic keeper pins,remove 2 phillips screws from beneath lower front washer panel,slightly lift upward on panel to release.remove old broken belt,push new belt beneath large tub pulley,put belt on small motor pulley,push back belt tension /idler arm,start belt on large tub pulley,turn tub pulley by hand to run... read more

The primary problem was that the tub seal assembly was leaking.

  • Customer: Rick from Walkerton, IN
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set
  • 240 of 301 people found this instruction helpful
1. I began by removing the two screws that hold the front panel in place. I then lifted the top free of the front panel and tilted it back to get it out of the way.

2. Using my fingers, I released the tabs that connect the tub cover to the tub. It took some effort to remove the cap("Mechanism") over the bolt connecting the agitator to the agitat... read more

Drum glide wore down and caused close to get stuck between drum and front panel.

Upper Drum Glide – Part Number: 5303937139
  • Customer: William from Boise, ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 177 of 243 people found this instruction helpful
Unpluged dryer. Removed the top of dryer by pushing in a retaining clip on both sides of the front lip with a screw driver. Remove the two screws on both sides of front panel. These screws are square head or phillips #2. Unplugged the wiring harness to front panel (make sure power has been disconnected). Support drum and lean front panel away from dryer ... read more