Models
>
GLGC36S8CBA
GLGC36S8CBA Frigidaire Cooktop - Overview
Sections of the GLGC36S8CBA
[Viewing 4 of 4]
Manuals & Care Guides for GLGC36S8CBA
Click to downloadInstall
Installation Instructions
(0.61MB)
Manual
Owner's Manuals
(1.12MB)
Manual
Owner's Manuals
(1.52MB)
Wiring
Wiring Diagram
(1.61MB)
Keep searches simple, eg. "belt" or "pump".
BLACK BURNER CAP KI
PartSelect #: PS11770663
Manufacturer #: 5304507219
This burner cap kit includes 5 black burner caps. The caps sit on top of the burner head. This part helps spread out the burner flame for even heating and protects the burner head from spills.
No Longer Available
Small Burner Cap
PartSelect #: PS439723
Manufacturer #: 316206600
Sold individually.
$76.33
In Stock
Burner Igniter
PartSelect #: PS443849
Manufacturer #: 318148700
Also known as spark electrode. This part helps your burner ignite and produce flame.
$46.45
In Stock
SPARK MODULE
PartSelect #: PS11770793
Manufacturer #: 808608804
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$67.31
In Stock
Igniter Switch
PartSelect #: PS437310
Manufacturer #: 316032002
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
$55.82
Special Order
Burner Pan - Small - Right Rear
PartSelect #: PS444054
Manufacturer #: 318168104
This has a small center hole.
$119.07
In Stock
Burner Grate
PartSelect #: PS820896
Manufacturer #: 318221711
Sold Individually.
No Longer Available
Questions And Answers for GLGC36S8CBA
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the GLGC36S8CBA
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
gas ignitor continued to run after turned on or off
Removed all of the grates, control knobs and gas diffusers. Unscrew the drip pans, two on each pan, which attach the pans to the gas supply. Raised the drip pans from the top and unplugged the ignitors from all pans. Remove the top and the rubber deflector over the ignitor switch. The ignitor switch snaps off and on. One of the seals unde
... Read more
r the drip pan was broken and needed replaced. I would recommend ordering these also. Turned out this was a good time to give everything a goo cleaning then replace as removed.
Read less
Parts Used:
-
Duff from Buena Vista, CO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
10 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas stove won’t light on half the appliance
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow
... Read more
er and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
Read less
Parts Used:
-
Julieta from ELMIRA, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!