Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GLEQ2152ES1 > Parts

GLEQ2152ES1 Frigidaire Dryer - Parts

All parts for the Frigidaire Dryer GLEQ2152ES1

Below is a list of all parts for the Frigidaire Dryer GLEQ2152ES1 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the GLEQ2152ES1
15-28 of 96
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$121.92

Drive Motor with Pulley

This motor has a double shaft.

$8.87

Grounding Ball

This grounding ball is used in dryers and works to prevent friction in the rear bearing when the drum rotates. If your dryer is making a squealing, loud, banging noise or will not operate, it is best to replace it to solve the problem. To repair, first remove the main top and remove the strap at the back of the dryer to lift the lid. Next, remove the two wire harnesses and Phillip screws on the sides that connect to the front panel. Now that you have access to the inside of the dryer, refer to the manual for further instructions by following the manual provided by the manufacturer.

$30.68

Idler Arm Assembly

Part may differ in color from image. Please note that this is only a cosmetic difference.

$8.72

Door Strike

The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. This is a simple repair that should only take a few minutes to complete. The package contains one strike. Open the dryer door, and use a flat head screw driver to snap the old strike out if it has not fallen out already. Simply push the gasket out of the way, squeeze together the strike and place inside of the opening. Wiggle to ensure it is set in place properly.

$99.12

Door Handle

Handle only.

$6.65

SCREW

$33.27

Upper Front Felt Seal

$31.04

High Temperature Adhesive

This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before applying the adhesive, ensure that the area is completely clean from any debris and is dry. You may wish to use small clamps to hold the material in place while it dries. If the felt has come loose or broken apart, this may cause your dryer to make loud noise, indicating that new felt or rubber needs to be glued into place. Use gloves to apply glue.

$8.30

Grounding Ball Clip

This grounding ball clip is made of metal. Sold individually.

$6.86

SCREW

Sold individually.

$36.35

Seal

Adhesive is sold separately.

$7.92

Single Clip

Sold individually.

$29.43

Terminal Block Kit

This kit includes 3 screws and 3 terminals.

$21.00

Door Hinge

Sold individually.

All Parts for the GLEQ2152ES1
15-28 of 96