Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GHW9400PL0 > Instructions

GHW9400PL0 Whirlpool Washer - Instructions

All installation instructions for GHW9400PL0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the washer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GHW9400PL0
241-255 of 405
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Handle was Broken

  • Customer: Thomas from Houston, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed screws from broken handle. Placed new handle in place. Screwed new handle in place.

Previous handle on washer broken (split)

  • Customer: Paul from El Cajon, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took two screws out, removed old handle. Put new handle in place and put two screws in. Very simple..15 minutes at most!

Drain kit

  • Customer: Debra from hilliard, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Took old one off and put the new one on. Was very easy. Hardest part was disconnecting hose clamps, which was still easy

Broken Knob

  • Customer: Walter from Hoodsport, WA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I managed to complete the repair all by myself without enlisting the help of my husband. I removed the broken knob and tenderly replaced the new one. I say 'tenderly' because for the price we had to pay for a simple little knob, I wanted to ensure to treat it like gold.

The handle cracked

  • Customer: JAYNE from BOCA RATON, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It was easy-unscrewed (use a torx screw driver-star) the 2 screws & put the handle in place & put the screws back in.

broken impeller on drain pump

  • Customer: James from Findlay, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
took front panel off. Pump is right there easy to work on. Used pliers to take 2 hose clamps off. Used star screw driver to take 2 screws off of pump and removed old pump. The Assemblely goes the same way but the drain hose coming off the tube is not very easy to get back on. Hose is flimsey and the stem, on the end of the drain pump isnt long enough to keep hose on while tring to slide hose clamp back on.

needed to install shipping bolts

  • Customer: Anthony from Avon Lake, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Read the instructions provided by PartSelect.....and with a bit of patience I installed all four bolts so the washer's inside agitator was not damaged in shipping. I highly recommend that anyone who is moving/storing or shipping their washer that you find the correct shipping bolts according to your model and make and install them prior to moving your appliance.

Broken Door Handle

  • Customer: Dennis from Sevierville, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Simple reair .....Two Torx screws to remove on inside of handle also remove the rubber finger cushion from the old handle so you can install it on the new unit, this is not included. The whole repair souldnt take more than 5 - 10 minutes.

Plastic door handle broke into two pieces and could not get the door open.

  • Customer: Karen from Brookville, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took out screws and replaced it with the new handle.

Machine won't run. Door won't open. Makes buzzing sound

  • Customer: Arlene from MIAMI, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed top cover. Manually opened door through top cover opening. Removed 3 screws at front holding assembly. Removed 3 harnesses attached to assembly. Replaced with new assembly and screwed back in. Replaced harnesses. Certainly an easy DIY job.

broken door handle and leak near the bottom of the door

  • Customer: Mark from Cape Coral, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Searched YouTube and found a video of the bellows install. Viewed a couple of times and followed the instructions for a successful install in less than 1/2 hour.

Malfunctioning Door Lock Latch

  • Customer: Francisco from Halandale, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It was easier than I thought it would be: 1. Order the parts 2. Upon arrival, went back to the website to get an idea as to how to install the parts. 3. Although a little apprehensive at first, the replacement and installation of the parts went flawless and was doing the laundry 15 min. Later. Done!

broken handle

  • Customer: Daniel from Corona, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
replaced in less than 5 minutes

Would not drain..."Suds"

  • Customer: michael from independence, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I did not replace the pump body. I just removed the motor with the 3 screws. Put the new one on. This way I did not need to mess with the hose clamps.

Bellow had mold and mildew

  • Customer: Winifred from Livonia, MI
  • Difficulty: Very Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Found it impossible to get the bellow off the machine. Removed the front spring. Even tried to but off the bellow. No luck. Called repairman. He had to take off the front panel, door panel, and the top of the machine before he could remove the back spring/clamps.
All Instructions for the GHW9400PL0
241-255 of 405