Models > GHW9300PW4 > Instructions

GHW9300PW4 Whirlpool Washer - Instructions

All Instructions for the GHW9300PW4
271 - 285 of 317
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
door hinge worn out , door handle broken
remove old worn parts , there was a little difficulty removing one screw due to rust but otherwise it went well.
Parts Used:
Screw Door Handle Door Hinge
  • Bernardino from Bronx. NY, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
hole in bellow
pulled the front and top of the machine off, pulled off the old bellow, ordered the new bellow, and put the new bellow on. we looked on youtube.com for a video on repairing the machine.
Parts Used:
Washer Door Bellow
  • laveda from juneau, AK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
door handle broke in half
Gave handle to husband who installed it in less than 15 minutes. Your service was great!
Parts Used:
Door Handle
  • Lisa from Duluth, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door Lock Latch Broken Inside
Very easy repair, once I read the reviews and watched a couple of you tube videos. I just released the band holding the gasket in place, pulled it back, unscrewed the latch and installed a new one. Less than a 10 min job. I am glad I found this web site, thanks guys!!
Parts Used:
Door Lock Latch
  • Chris from North Reading, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The two attachement supports for door handle completely broke off.
Took the brokern door handle attachment support screws off with my power drill in less than 10 seconds and intalled new handle in 20 seconds using the same power tool. Washer was ready to go.
Parts Used:
Door Handle
  • Samuel from Fresno, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The washing machine wouldn't drain
I followed the instructions and it was surprisingly simple. Glad I didn't call the "handy-man" since it was easy to do it myself as a handy-woman!
Parts Used:
Drain Pump Kit
  • Ann from Algonquin, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken latch on front of washer
Took both the screws out on the top back. Lifted up the back about 1/2 inch and slid to the back. Reached into the front of the washer where the latch was connected. Disconnected the 3 wires (plugs) attached to the latch, took out the 3 screws located inside the washer door. Took a second person just to hold the latch and bring it out after the screws were off the front inside the washer door. Put new latch in, connected the wires, put in the screws behind the washer door (3 of them) and slid the top into place and put the screws in the back. Takes longer to tell you than to do it. Remember the screw on the left side front (top) as you face the washer and remove that screw. The plastic had disintegrated on mine but am not going to replace that part until I have to.
Parts Used:
Door Lock Latch
  • Brenda from Citrus Heights, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bellows were moldy and underneath had mold
We hired a local repairman and he even had trouble . I would not suggest anyone trying this installation on their own. It took the repair guy an hour to do and he struggled. Not an eary installation
Parts Used:
Washer Door Bellow
  • Charles from Murphy, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Door handle was cracked and had to be replaced
The part was the right one, so it consisted of 2 screws out and two screws in. 3 minutes total. I needed to use an Allen wrench instead of a screwdriver, as was advertised.
Parts Used:
Door Handle
  • Kevin from Beaver, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door handle broke off in two.
Unscrewed old pieces and used these screws to attach new handle. Easy!
Parts Used:
Door Handle
  • Melissa from Searcy, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Old hinge was worn and sagging.
Easily took the old door off of the dryer unit then removed the hinge bracket and replaced it with the new part.
Parts Used:
Door Hinge
  • Jason from East Quogue, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
motor control
I just take out the botton part and fine what part what i need chage and just chage exactly like the old if yoo dot remember all the wires please take pictures and you hava guia to check went you are finished
Parts Used:
Electronic Control Board
  • EDGAR from DALLAS, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
door lock broke
I read what others wrote and put two and two together and 15 mins. later I was up and running. lots to take apart but it all went smooth and no left over parts washer runs like new again
Parts Used:
Door Lock Latch
  • vicki from westhope, ND
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Clean Water found in washer after it was used. Usually the day after it was used last
Disconected washer, disconected water lines, Removed top cover. Removed screw holding valve, disconnected 2 connectors for valve put everything back together
Parts Used:
Water Inlet Valve
  • Nestor from Revere, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken knob
The dryer is in a walkway from the garage to the kitchen. One of my boys accidentally brushed up against the knob and it broke off.That happened on a Tuesday night around 9pm.I got on line that night and ordered the part and it arrived onThursday. It almost seemed impossible. That's why I am writing this review.
Parts Used:
Control Knob
  • Aqua View Pool from Naples, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GHW9300PW4
271 - 285 of 317
Back to Top