Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GHW9150PW4 > Instructions

GHW9150PW4 Whirlpool Washer - Instructions

All installation instructions for GHW9150PW4 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the washer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GHW9150PW4
211-225 of 351
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The handle cracked

  • Customer: JAYNE from BOCA RATON, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It was easy-unscrewed (use a torx screw driver-star) the 2 screws & put the handle in place & put the screws back in.

broken impeller on drain pump

  • Customer: James from Findlay, OH
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
took front panel off. Pump is right there easy to work on. Used pliers to take 2 hose clamps off. Used star screw driver to take 2 screws off of pump and removed old pump. The Assemblely goes the same way but the drain hose coming off the tube is not very easy to get back on. Hose is flimsey and the stem, on the end of the drain pump isnt long enough to keep hose on while tring to slide hose clamp back on.

needed to install shipping bolts

  • Customer: Anthony from Avon Lake, OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Read the instructions provided by PartSelect.....and with a bit of patience I installed all four bolts so the washer's inside agitator was not damaged in shipping. I highly recommend that anyone who is moving/storing or shipping their washer that you find the correct shipping bolts according to your model and make and install them prior to moving your appliance.

Broken Door Handle

  • Customer: Dennis from Sevierville, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Simple reair .....Two Torx screws to remove on inside of handle also remove the rubber finger cushion from the old handle so you can install it on the new unit, this is not included. The whole repair souldnt take more than 5 - 10 minutes.

Plastic door handle broke into two pieces and could not get the door open.

  • Customer: Karen from Brookville, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took out screws and replaced it with the new handle.

Machine won't run. Door won't open. Makes buzzing sound

  • Customer: Arlene from MIAMI, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed top cover. Manually opened door through top cover opening. Removed 3 screws at front holding assembly. Removed 3 harnesses attached to assembly. Replaced with new assembly and screwed back in. Replaced harnesses. Certainly an easy DIY job.

broken door handle and leak near the bottom of the door

  • Customer: Mark from Cape Coral, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Searched YouTube and found a video of the bellows install. Viewed a couple of times and followed the instructions for a successful install in less than 1/2 hour.

hot water flowed into washer uncontrolably

  • Customer: vincent from ledyard, CT
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
i tore down the "tech use only" pamphlet from inside of the machine.i am an auto tech by the way. so i got into the onboard computer of my machine using this pamphlet.the machine's computer took over and went through a series of tests, which pointed me to the correct location of the problem.i acted on that info and replaced my water inlet valve. the actual code was " FH ".

Malfunctioning Door Lock Latch

  • Customer: Francisco from Halandale, FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It was easier than I thought it would be: 1. Order the parts 2. Upon arrival, went back to the website to get an idea as to how to install the parts. 3. Although a little apprehensive at first, the replacement and installation of the parts went flawless and was doing the laundry 15 min. Later. Done!

broken handle

  • Customer: Daniel from Corona, CA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
replaced in less than 5 minutes

Would not drain..."Suds"

  • Customer: michael from independence, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I did not replace the pump body. I just removed the motor with the 3 screws. Put the new one on. This way I did not need to mess with the hose clamps.

Bellow had mold and mildew

  • Customer: Winifred from Livonia, MI
  • Difficulty: Very Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Found it impossible to get the bellow off the machine. Removed the front spring. Even tried to but off the bellow. No luck. Called repairman. He had to take off the front panel, door panel, and the top of the machine before he could remove the back spring/clamps.

The Bellow of my washer machine was broken

  • Customer: JOSE from OZONE PARK, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I watched video first and it help me a lot to do the repair myself of my washer machine and i save about $ 1,500 dollar. Thanks

Washer was giving us error codes and was shutting off during the wash cycle.

  • Customer: Randy from Lake City, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Repairs were very simple. Turn off the electricity to the machine. Remove approx 5 screws in the back of the top cover. Remove the cover and the micro prossessor is located towards the back of the machine. Very easy to get at. Just unplug the wires one at a time from the old one and place it into the new one. I also took a picture of the wires on the old processor before I started just in case I messed up. Put the cover back on the washer and it worked great.

Door lock latch broken

  • Customer: Scott from Indianapolis, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I looked up the repair on YouTube. The exact repair was there. Remove the ring around the boot. Remove the part of the boot by the latch. Remove the latch. Replace the latch . Refit the boot. Replace the wire ring making sure the spring is down. Taadaa! The guy on the video took two minutes or so. It took me seven because I was very deliberate in my work, and it was the first time I had done this repair. The wife was very pleased!
All Instructions for the GHW9150PW4
211-225 of 351