Parts That Fix Whirlpool Washer GHW9100LW1 Will Not Start
Will Not Start is a commonly reported symptom for the GHW9100LW1 Whirlpool Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your GHW9100LW1 Whirlpool Washer that will fix Will Not Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This part is used on front load washers and includes the interlock switch assembly.
Attaches to door lock mechanism.
This part regulates the temperature of the water in the tub. The sensor is located in the heating element.
This part helps with the tumble and spin cycle. If your motor won't run in either the wash or rinse cycle or if the fuse on the board is blown, then you have to replace this part. The fuse is not sold separately. NOTE: Motor is sold separately.
This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear. NOTE: Per Manufacture, belt measures 48.22" long uninstalled and the belt will stretch To 51.53" when installed.
This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.