Models > GC900QPPB2 > Instructions

GC900QPPB2 Whirlpool Trash Compactor - Instructions

All Instructions for the GC900QPPB2
91 - 97 of 97
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The panel got bent
Took the bent one out, put the new one in. The repair was not the story, the story was that we ordered the part on Monday afternoon and it was delivered on Tuesday! And the shipping was less than $8.00. Fresno to Elk Creek in less than 24 hours for that price was amazing!
Parts Used:
Panel, Inner
  • Steven from Elk Creek, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken plastic drive gear
Very simple, changed the gear, adjusted the drive and tested. Very straight forward.
Parts Used:
Drive Gear Kit
  • Charles from Goshen, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Cracked handle.
I got the model number. Went to partselect nad found picture.Got part number. Ordered part and recieved next day. Opened drawer and removed old handle (2 screws ) and installed new part.Closed draw. DONE
Parts Used:
Handle - White
  • Bill from Columbus, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken handle
removed old handle by removing screws - installed new handle by inserting screws in same in same location as those removed
Parts Used:
Container Handle
  • Judy from Bakersfield, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
compactor will not stop when compaction complete on top cycle
take 2 screws out on top cover with key switch. remove two screw holding directional switch. remove wires, one at a time, and place on the new switch. put new switch in place with two screws. put front cover on with two screws and test. works like a charm.
Parts Used:
Directional Switch
  • BRUCE from CASPER, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Drive gear worn out, because I put glass bottles in it. Should'nt do that.
Followed PartsSelect instructions, the Compactor was appoximately $1000. when I purchased it. The kit was $26.14. I will forever be a customer of this company. Thank you, Brian
Parts Used:
Drive Gear Kit
  • Brian R from Hot Springs, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Lock Switch Broken
Removed unit, put in new one.
Parts Used:
SWITCH-OFF
  • RICHARD from GILFORD, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GC900QPPB2
91 - 97 of 97