All Installation Instructions for Whirlpool Trash Compactor GC900QPPB1

Broken plastic drive gear

Very simple, changed the gear, adjusted the drive and tested. Very straight forward.

Parts Used:

Drive Gear Kit

Charles from Goshen, KY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

Cracked handle.

I got the model number. Went to partselect nad found picture.Got part number. Ordered part and recieved next day. Opened drawer and removed old handle (2 screws ) and installed new part.Closed draw. DONE

Parts Used:

Handle - White

Bill from Columbus, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

broken handle

removed old handle by removing screws - installed new handle by inserting screws in same in same location as those removed

Parts Used:

Container Handle

Judy from Bakersfield, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

compactor will not stop when compaction complete on top cycle

take 2 screws out on top cover with key switch. remove two screw holding directional switch. remove wires, one at a time, and place on the new switch. put new switch in place with two screws. put front cover on with two screws and test. works like a charm.

Parts Used:

Directional Switch

BRUCE from CASPER, WY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Drive gear worn out, because I put glass bottles in it. Should'nt do that.

Followed PartsSelect instructions, the Compactor was appoximately $1000. when I purchased it. The kit was $26.14. I will forever be a customer of this company. Thank you, Brian

Parts Used:

Drive Gear Kit