FRS6LF7JM3 Frigidaire Refrigerator - Instructions

Took all food out of the refrigerator door. Pulled the door off by unscrewing the 3/8 hex-head screws on top and bottom hinges. The door is relatively light and removes very easy. Unscrewed and removed the broken plastic cam pieces and replaced with the new ones. Replaced the steel hinge, even though it was still in good shape. The hinge kit comes with left and right hinges as well as a spare cam insert with each hinge, so I still have all the left side parts and spare cam insert for the right side for a future fix if needed. The repair itself was extremely easy and took about 10 minutes; the total time that included emptying the food, cleaning the bottom grill plate and replacing the food was about 20 minutes of my evening.

Remove door,remove hinge,replace hinge,replace door. Very easy.

The bin was a perfect fit. It just slid into the groove.

I followed the video step by step instructions and the job was very easy to complete. It took me about 20 minutes to complete because of the removal of all the trays and food on the shelves. Also the old crisper supports were broken in a manner that they had to be removed in pieces it did not pop out like on the video. I ordered the wrong Dispenser Cover because I didn't know how to get the complete Model # for the Refrigerator. I contacted Customer Service and got immediate response and was told where to find the complete model # was given a return authorization. Am extremely happy with my PartSelect experience and will recommend them to all my friends.

removed 3 screws on top hinge plate. removed door and replaced hing bearing. reinstaled door.

The unit came with a wireing harnes.The only thing that was not the same was the ADC unit plug.thats why you replace it.take the cover off and replace one wire at a time, plug the new ADC in and replace covers.I should have gotten the fan and the thermostat at the same time.The fan was my problem

I removed selfs,back covers. replaced wireing harnes on fan and hard wired the thermostat .very easy to fallow instuctions

Pull out the old clips,that were crack.The new ones are hanging off.I don'nt know if i should put some kind of glue,or something.To help it stick on.

I replaced the filter. However the ice cubes are very small and are being caught in the tines. Hopefully, once the filter gets more water through it, the ice cubes will be bigger. This is what happened the last time I replaced the filter.

got part and slide into door. Super easy!

So easy ... all I had to do was to snap the shelf into place - all of 2 seconds. The best part of the process was ordering the exact part I needed and how quickly it was received - awesome service. Thank you.

So easy a cavewoman could do it!

took ice maker out empty ice removed 6 screws removed auger out took off lcck nut pulled off drum replaced with new drum reassembled.

I diagnosed the problem by checking the water flow at the supply valve and hose by disconnecting the hose from the back of the fridge. Found the pressure to be adequate. I then reconnected the supply hose and removed the cardboard backing from the fridge and removed the nuts holding the water inlet valve to the chassis. I loosened the first hose that runs from the bottom of the valve and had my wife activate the valve by pushing the water switch on the front of the fridge. Water basically sputtered out of the valve and I decided that was where the problem was. I ordered the valve from partselect. When it arrived I thought it was the wrong part because it had push-fittings whereas my original valve was all thumb screws. I took a chance and one by one used a utility knife to cut the hose free of the old valve as close to the nut as possible. Connecting them to the new valve was a piece of cake! Just make sure the hose bottoms out when you push it in. I turned the water back on, no leaks! Plugged the fridge in and pushed it back to the wall. After a bit of air bled out I had a strong flow of wateragain like new! The next day the ice cubes were solid again! We use the filtered water so many times a day and had been so frustrated with the slow water flow we had considered donating the fridge and buying a new one; thanks to this easy fix we expect keep it for years to come!

Upon receipt of replacement part I simply snapped it into place. More accurately, the "less than 15 mins" above was more like less than 15 seconds. Ordering this part was easy and clearly understood. I ordered about noon one day and received the FedEx shipment evening of the following day. Incredible! While somewhat pricey for what the part is I understand the costs associated with stocking minor parts and am totally happy with my whole shopping experience at PartSelect. I have already recommended PartSelect to others and have bookmarked the website for future reference as needed.