FRS26H5ASB4 Frigidaire Refrigerator - Instructions

followed the video instructions and wa-la! Saved my money by not calling the repair man, the shipment of my part was fast, and the repair was even faster. Thank you for helping me in my repairs. Very Satisfied!!! Carol

Removed the right door. Removed three bolts that hold on the door on. Once removed, I removed the bushing with a screw driver and popped the new one in. Replaced the door and no more noise. Fixed the problem. I also watched a you tube video before I started.

This was probably the easiest repair I have done on this refrigerator. I pulled the unit away from the wall, turned off the water, and disconnected the hose. I have a wooden floor in my kitchen so I was careful to put a towel under the hose and valve. Very little water drained out but I kept the towel there for insurance. After removing the access panel, I removed the two screws holding the valve in place, slid it back to where I could unplug the wiring connected to it. The connectors are color coded so there is no worry about putting them back incorrectly. The new valve uses push-in type water connections, so you have to cut the old style connections off of the plastic water lines. Kitchen shears did this easily. Then is was just a matter of pushing each line into the proper connector on the valve, reattach the electrical connectors, and slide the valve back in place. Reinstall the screws, reinstall the access panel, hook up the water hose, slide the unit back into it's niche, and run about a gallon of water through the dispenser and you are done.

Took every thing out of the door, removed 2 screws (plus cover screw), laid the door down, replaced the parts, put the door back on. When the refrigerated stuff was back in the door shelves, I was done.

As per video. No problem.

By removing the old water filter and installing the new one

Just popped it in..didn't fit really well...had to force it some what which I didn't like but same drawer. Good to go.

Replaced bin in door. Noi tools needed

Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.

First off, I ordered the wrong part. Following the "return" protocol, , Partselect, UPS had the correct part delivered to me the next day. The instructional videos linked to the part description made my repair effortless. A great resource for DIY's.

Received the parts promptly and did the repair just as the video showed. All went well and had the repair completed in 10 minutes. For me that was remarkable because I have two left hands! Would highly recommend partselect.com

pulled out freezer, went to floor,reached in next to compressor pulled off clip just like on the video.Pulled off old capacitator took off wire leads.Installed new one. Freezer runs great.Loaded it up with beef pork and venison. No problems.

Called repair person, 80.00 to come look at it. Deceided to see if I could find part on my own. Surfed the net found this website, ordered the part for 5.00, total 13.00 including shipping. waited a few days, received part in mail, lifted refrigerator door off hinge, inserted the part. Works like new. 80.00 plus repair, cost me 13.00. Amazing

great less than 5 minutes

Everything went according to plans and as expected. It could not have gone any easier. Customer service was outstanding! I will certainly use your service again.