Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FPHD2491KF0 > Instructions

FPHD2491KF0 Frigidaire Dishwasher - Instructions

All installation instructions for FPHD2491KF0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FPHD2491KF0
1-9 of 9
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

busted center portion of silverware basket

  • Customer: Craig from Marlborough, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 18 of 29 people found this instruction helpful
New one snaps into place easily.

large holes in the bottom of the basket where pieces of plastic kept breaking off

  • Customer: Lauren from Peabody, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 9 people found this instruction helpful
I replaced the basket. No tools necessary. New basket seems sturdier than original. Very satisfied with my purchase.

Broken door on dispenser

  • Customer: Justin from Miami, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 15 people found this instruction helpful
The only difficultpart was to figure out how to remove the stainless cover from the door. Seems it slides upwards after screws are removed. After that it is self explainatory and goes back together in 5 minutes.

wheel assembly rusted and 1 wheel fell off causing rack to fail

  • Customer: Robert from CARNEGIE, PA
  • Difficulty: Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 3 of 3 people found this instruction helpful
replacing dishrack was simply removing old and sliding new onto track. however, removing and reinstalling water dispenser blade mounted on bottom of existing rack to new rack required much more time and effort .I needed to use flat screwdriver to pry plastic clamps apart and then a pair of channel locks to release assembly from original rack. It took some effort to finally accomplish . I believe all models that use this replacement rack would have this same issue with the dispenser blade and instructions for re-installation should accompany the new rack or better yet, new blade should be included on rack for those not familiar with using tools.

Fence corroded

  • Customer: James from BRIGHTON, MI
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
Less than 1 minute to remove old part and install new fence

Portions of the bottom of the center basket melted out not long after purchase.

  • Customer: Alan from Winterville, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The entire assembly drops into place.

motor began to get noisey then stopped woking completly

  • Customer: MIKE from CHICO, CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Unplug the dishwasher. Turn off water supply. Use adjustable wrench to take off water supply line, the take off the drain hose. remove any mounting brackets holding the dish washer in place. Slide it out, the lines & plug should come out with it. Place dishwasher on it's back. I have a bad back, so I set it up on a work bench. Remove 4 screws & 1 screw holding the ground wire. remove the motor. You may have to pry a little. Install new pump, I put a little lube on the o rings. Gently work it in place using the 4 mounting screws. Reconnect ground.Reverse process to reinstall dishwasher
All Instructions for the FPHD2491KF0
1-9 of 9