Models
>
FL26C
FL26C Weed Eater Trimmer - Overview
Models starting with FL26C
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Clogged muffler
Remove the 4 screws holding the rear motor casing. Then you can take the easy route and drill through the front motor housing with a 3/8 to 1/2 bit in order to access the front muffler screw. If you want to work harder you must remove the motor from the shaft, remove the clutch assembly (this requires a long 15t torx bit, removing the spa
... Read more
rk plug to stuff the piston with rope or rag to seize up the piston, and then removing the front motor casing to access the front muffler screw). Once you access both muffler screws remove them with the t20 torx driver. Install the new muffler with the small gasket inside the housing, and the larger gasket/heat shield between the muffler and the motor.
Read less
Parts Used:
-
Rosanne from BRIDGEWATER, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!