Models > FL20

FL20 Trimmer - Overview

Models starting with FL20

Keep searches simple, eg. "belt" or "pump".
Fuel Line – Part Number: 530069247
Fuel Line
★★★★★
★★★★★
(4)
PartSelect #: PS9472280
Manufacturer #: 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged...
$6.36
  In Stock
Order within the next 6 hrs and your part ships today!
Engine Fuel Filter – Part Number: 530095646
Engine Fuel Filter
★★★★★
★★★★★
(2)
PartSelect #: PS9285148
Manufacturer #: 530095646
This fuel filter is for lawn and garden equipment engines. Fuel filter cleans the fuel before it reaches the carburetor. Work in a well-ventilated area when installing this part. Drain the fuel...
$5.09
  In Stock
Order within the next 6 hrs and your part ships today!
Tank Purge Line – Part Number: 530069216
Tank Purge Line
★★★★★
★★★★★
(2)
PartSelect #: PS9472264
Manufacturer #: 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the ...
$6.36
  In Stock
Order within the next 6 hrs and your part ships today!
Assembly-Fuel Tank – Part Number: 581263701
Assembly-Fuel Tank
PartSelect #: PS9982318
Manufacturer #: 581263701
This fuel tank is for lawn and garden equipment engines. Fuel tank holds the gas that's needed by the engine. Work in a well-ventilated area when installing this part. Drain the existing fuel f...
$17.84
  In Stock
Order within the next 6 hrs and your part ships today!
Spark Plug (RCJ6Y) – Part Number: 952030249
Spark Plug (RCJ6Y)
PartSelect #: PS9484195
Manufacturer #: 952030249
The manufacturer-certified white and silver Spark Plug RCJ6Y ignites the air-fuel mixture inside the combustion chamber of your engine. Consult your manual or check your model number to determine if t...   No Longer Available
Fuel Cap (w/ retainer) – Part Number: 530014347
Fuel Cap (w/ retainer)
★★★★★
★★★★★
(1)
PartSelect #: PS9468748
Manufacturer #: 530014347
The Fuel Cap with retainer, often simply known just as the fuel cap, keeps fuel from splashing out of your tank and debris from entering it. Black in color, it is sold individually and made of plastic...
$8.91
  In Stock
Order within the next 6 hrs and your part ships today!
Trigger – Part Number: 530058000
Trigger
★★★★★
★★★★★
(1)
PartSelect #: PS9969962
Manufacturer #: 530058000
$6.36
  In Stock
Order within the next 6 hrs and your part ships today!
Bulb - Purge Zama – Part Number: 530058709
Bulb - Purge Zama
★★★★★
★★★★★
(2)
PartSelect #: PS9471941
Manufacturer #: 530058709
$7.64
  In Stock
Order within the next 6 hrs and your part ships today!
Ignition Module – Part Number: 578287001
Ignition Module
★★★★★
★★★★★
(2)
PartSelect #: PS9981837
Manufacturer #: 578287001
$19.12
  In Stock
Order within the next 6 hrs and your part ships today!
Foam - Air Filter – Part Number: 530057781
Foam - Air Filter
★★★★★
★★★★★
(1)
PartSelect #: PS9471789
Manufacturer #: 530057781
$5.09
  In Stock
Order within the next 6 hrs and your part ships today!
Starter Spring – Part Number: 545008010
Starter Spring
PartSelect #: PS9482319
Manufacturer #: 545008010
The Starter Spring is a metal spring used to restract the rope after you pull it to start the engine. Installation of this OEM part is rated as "Medium" difficulty and requires a screwdriver, nutdrive...
$7.64
  In Stock
Order within the next 6 hrs and your part ships today!
Piston Ring – Part Number: 545154001
Piston Ring
★★★★★
★★★★★
(1)
PartSelect #: PS9482765
Manufacturer #: 545154001
$5.09
  In Stock
Order within the next 6 hrs and your part ships today!

Common Symptoms of models starting with FL20

[Viewing 2 of 2]
Will Not Start
Fixed by
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Weak spark. Multiple fuel leaks/ no start.
Pull #25 torx 4mm screws until you find the ignition module. Replace it, use lock tight, gap with a paper credit card. Reassemble. Replace cap and fuel lines. Pump and pull till it blows the carb cleaner and Blaster out and starts.
Parts Used:
Ignition Module Fuel Line Tank Purge Line Fuel Cap (w/ retainer) Engine Fuel Filter
  • Anthony from ST GEORGE, UT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
38 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both the Fuel line and the Engine fuel line, where dry rotted.
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fall into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
Parts Used:
Fuel Line Tank Purge Line Engine Fuel Filter
  • Victor from SCOTTSVILLE, KY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
16 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fuel and Purge lines had disintegrated
Disassembled it and cleaned fuel tank. Cut and ran new fuel lines, installed filter and reassembled. Parts fit perfectly and got running after not running for over 20 years.
Parts Used:
Fuel Line Tank Purge Line Engine Fuel Filter
  • Casper from ERATH, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
9 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!