FGP215EN1 Roper Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My center grill igniter was not working.
I removed the burners and top cover of the range. I pulled the range from between my cabinets so I could access the wires that go to the igniters. I removed the two screws from the igniter bracket and pulled the broken igniter up from the mounting frame. I cut the wire from the old igniter to make it easier to remove the old wire and route the new igniter wire to the rear of the range. The new igniter had the exact same plugin which made installation a snap. I reassembled the range top top and tested the new igniter. Works perfectly. It took less than 30 minutes.
Parts Used:
-
Ronald from WILLIAMSTOWN, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Missing stove knob
-
Roberta from Chicago, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!