Models > FGHD2433KF1 > Instructions

FGHD2433KF1 Frigidaire Dishwasher - Instructions

All Instructions for the FGHD2433KF1
301 - 315 of 537
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
seal leak from valve solenoid
Turn the water off to the dishwasher. Loosen water supply connector w/ crescent or sized wrench. Remove bracket srews from water inlet. Remove spring clip from discharge hose, remove hose from discharge nipple. Replace with new part in reverse order.
Parts Used:
Water Inlet Valve - 120V 60Hz
  • Steven from Fort Collins, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper sprayer was falling off during every wash
This site was very user friendly. The appliance diagrams made it very easy to identify and order the part needed. I would HIGHLY recommend this site to anyone that is looking to get a part for their appliance.
Parts Used:
Upper Spray Arm
  • Kevin from South Burlington, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
upper spray arm kept falling off
Unscrewed the old part and screwed in the new one. All done by hand in 30 seconds. I feel like I saved a big service call bill.
Parts Used:
Upper Spray Arm
  • David from Saint Paul, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top spinner kept falling off
Went to the Frigidaire website and found no help. Found Part Select on google. Entered the Dishwasher Model, and zoomed in on the supplied chart. Ordered the broken part. Replaced the part by hand, no tools required. Thanks Parts Select.
Parts Used:
Upper Spray Arm
  • Glen from North Miami, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The upper spray head would fall off every time the dishwasher was run
Unscrewed the old one & screwed on the new took about 30 seconds
Parts Used:
Upper Spray Arm
  • Paul from Westfield, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Arm Kept Coming Off During Cycle
Reached in and screwed the new arm with nut on very simple. . Works fine
Parts Used:
Upper Spray Arm
  • JOY from SPRINGFIELD, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer displayed error message indicating trouble with water.
Shut off water, unpluggewd appliance, removed two screws holding part in place. Removed water supply hose from part to Washer, remover water supply from source to part. Reversed steps with new part. DONE! I'm not handy at all it was mostly luck diagnosing problem.
Parts Used:
Water Inlet Valve - 120V 60Hz
  • Nathaniel from Somers Point, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spray unit kept coming off after a wash
unscrewed old, screwed on new...CAKE!!
Parts Used:
Upper Spray Arm
  • Kevin from Macon, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the upper spray arm fell off
it took about 5 mins, this part is a complete repair if your upper (the small upper, not the big one bellow the top drawer but the small one above the top drawer) arm fell off.
Parts Used:
Upper Spray Arm
  • Ivan from Coral Springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door leaked watter
Pulled out old part...slid in new...works great!
Parts Used:
Dishwasher Bottom Door Gasket
  • Jeff from Hillsboro, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broke the wheel
merely snapped the part on
Parts Used:
WHEEL & BUSHING ASS
  • Patricia from Alpharetta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spray arm broke off
the part just snapped in and was so easy to order arrived right on time ,,,problem solved thanks partselect i will use you again next time the eleven year old breaks something..
Parts Used:
Upper Spray Arm
  • john from dade city, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper spray arm would not stay on.
Just unscrew the old one and screw on the new one. Piece of cake!
Parts Used:
Upper Spray Arm
  • Dennis from Graham, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking dishwasher
Within 5min of running the dishwasher it kept leaking out of one side at the bottom of the door. I took out all the screws all to find out there was no need to do so. Although having it open I was able to find that the bottom door gasket looked dry rotted and was falling apart... after a little research online I was able to find that this is a common issue and I ordered the new part. The part arrived next day... all I had to do was slide it in where the old one was. It did the trick!!! No more leaks!
Parts Used:
Dishwasher Bottom Door Gasket
  • Cheryl from Douglas, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spray arm
Replacement parts perfect, better design than original.
Parts Used:
Upper Spray Arm
  • Nils from Davis, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FGHD2433KF1
301 - 315 of 537