Models > FEQ332ES0 > Instructions

FEQ332ES0 Frigidaire Dryer - Instructions

All Instructions for the FEQ332ES0

The blower fan was loose on the drive motor shaft and rubbing against the housing

You tube has quite a few videos that walk you right through the entire process. Due to the age of my dryer I replaced the belt and the Rear Drum Bearing kit while I had it apart. There were videos for all of it. Easy fix.

Parts Used:

Drum Belt

Rear Drum Bearing Kit

Blower Housing with Blower Wheel

Darrin from Columbia Falls, MT
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

broken belt

The belt arrived in 2 days. I cleaned the inside and it took no time to replace the belt. All I did is removed the front.The video was very helpful.Your magnet is on my refrigerator for future orders. Thanks.....Andy

Parts Used:

Drum Belt

andrei from Clifton, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Loud squeeling noise

I had trouble with the little piece on the back side of the dryer not lining up with the bearing housing. I also didn't see how the drum was gonna stay in place but finally realized the front cover lines it up. All in all it was awesome to get the part I needed so quickly and cheap, thanks a lot.

Parts Used:

Rear Drum Bearing Kit