Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FEF336ECE > Instructions

FEF336ECE Frigidaire Range - Instructions

All installation instructions for FEF336ECE parts

These instructions have been submitted by other PartSelect customers and can help guide you through the range repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FEF336ECE
586-600 of 885
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

element would not heat.

  • Customer: Arnold from Carlsbad, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced the control I got from you , even though it was a little different the lugs matched up and works great.

My bake element burned out

  • Customer: Michael from Klamath Falls, OR
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
My bake element stopped working and found part of it burned. So I ordered a new one and received it in a week. It took about 2 min. to remove the old and install the new one and I'm back baking.

baking element broke

  • Customer: TRAVIS from BLOOMINGTON, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
unplugged stove;used nut driver to unscrew 2 screws and remove broken element;plugged in new element;used nut driver to replace screws. done. i used a flashlight to see better in oven. easy

broken drawer glide

  • Customer: tom from duluth, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I am a total non repairman. but with the video on how to I did'nt even brake the first part. ( I ordered 2 just in case)Will use you ror every part!

When turning the switch on for the large eye I could hear an electrical short behind the switch.

  • Customer: Kent from McHenry, MS
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Initially we realized there was a problem while cooking with the large eyes and we began hearing an electrical short behind the control switch. I unplugged the power from the oven/cooktop and removed the back panel where I could visually see soot on the switches where it was shorted. Careful while choosing your part from the diagram on Partselect.com. For the model FEF336ECJ, atleast for my oven, the eye switches were reversed and I ordered the small eye's switches! Luckily they have an outstanding customer support and immediately mailed out the new parts and a label to send the wrong parts back. Changing the parts out was very simple. Pull the oven out and UNPLUG IT from any electrical outlet. Remove the back panel. Double check from the label on the front of the control panel that you are working with the correct switch, and before removing the current switch, remove the wires one by one and place them on the new part to make sure you don't misplace these wires. Once the wires are connected to the new part, pull the plastic knob off of the old switch to reveal the screws on front of the panel. Place the new switch where the old one came from and fasten the screws back in place. Replace the knob, replace the back panel(for safety) and test the new switch before you push the oven back into place. If you can turn a screw driver, move the oven, and unplug the power, this easy do it yourself repair will save you possibly hundreds by not calling a repair/handyman who would absolutely love you to pay out the nose for such an easy task.

fried oven element

  • Customer: Warren from Kaplan, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
turned off the breaker that powered the stove removed 2 screws, removed old element from 2 sleeve like parts, replaced with the new element. replaced 2 screws and done took less than 10 mins to replace!! Thanks PartSelect!!!

bake element failure

  • Customer: Dana from Manassas, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
did just what was in the video.could not be more simple.

Bake element R&R

  • Customer: harry from havelock, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Replacement element was a snap to remove & replace. I used a small bolt driver with the appropiate socket. No issues.

no power to oven or broiler

  • Customer: Fredrick from hemphill, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Looked up the appliance and the suspect part.(clock/timer). It described the part and what problem it would fix.(no power to oven) Part shipped very fast and installation was quick and easy!!! They even had a installation video!! You can`t get any better than that!!!

Heating element went out

  • Customer: Clarice from Alvarado, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Watched the video, turned off breaker, used a 1/4 in nut driver,had it changed in 5 minutes. Easy, the video explains it all!!

No Problem

  • Customer: donna from haverhill, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
It was a piece of cake!!!!

No Power to the Oven

  • Customer: Tony from Hartford, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Watching the video showed an easy, unscrew and screw back on process while connecting the wires back. It was really that simple. Once it was complete (not even 10mins), plugged it back in, and its been working great since.

Over and Broiler stopped heating

  • Customer: Diane from West Blocton, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
I thought I was going to have to purchase a new stove which I could not afford, repair man would have cost over $300 to repair. I went on this wedsite, matched the part number with my stove, spoke with customer service, (very good experience), ordered parts, received in approximately 2 days,watched a brief (2 minute)video that came with my confirmation email and TA DAH.....fixed for 1/3 of the repairmems price and so easy. Thanks so much Partselect. Diane

element burned into

  • Customer: Bruce from Sesser, IL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
i watched your video and removed the screws that held the element in replaced the element and was back in business--it would have been nice to know that a 1/4 nut driver or a square inverted socket was needed but i managed--parts were here in 2 day--very impressed--i will order from you again when i need to do another job

Element broke in half

  • Customer: William from Moira, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Turned the powwer off. Took out the two screw that held the element in place. Unhooked the wires off each side. Put new element in place hooked up wires and put the screw back in. Turned the power back on.
All Instructions for the FEF336ECE
586-600 of 885