FDB4315LFC0 Frigidaire Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Error message of "eu" on unit appeared. Replaced. Blower vent
Pulled unit from under counter and replaced part
Parts Used:
-
Scott from Monroe, CT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
not properly cleaning dishes
snap the old part out and snap the new one in. Very simple and quick process.
Parts Used:
-
Shelly from Union, IA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
leaking water inlet
removed old hose by loosening clamps replaced hose reclamped
Parts Used:
-
BOB from MERRIMAC, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
The upper spray arm had fallen off.
I ordered a new upper spray arm. Detached the old arm holder using a rag because it was on there very tightly. I had to use a pair of scissors to hold the connector to keep it from sliding up while screwing on the new piece. It was super easy and the video was right on. After finding something to hold the connector tube comin out of dishwasher top it took about 30 seconds. Super easy!
Parts Used:
-
Cathy from Brandon, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
need drain house
Very helpful and was amazed how quickly it was delivered. Very pleased.
Parts Used:
-
Wilburn from Cumming, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
mouse made hole in both drain hoses
pulled machine out removed old put on new, which were a perfect fit. and were received remarkably fast.
Parts Used:
-
james from tracy city, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
leak at door
Bottom door gasket. Pulled old door seal on bottom of door out with pliers. Cleaned area groove with 1" putty knife to remove caked up soap. Pushed in new gasket by hand. had to do 2x due to missed channel lip on 1st try, it came all the way out to the front of the door. For the tub gasket, just pulled old gasket out, cleaned area with putty knife pushed in new gasket cutting extra off with scissors.
Parts Used:
-
James from Willis, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Dispenser would not dispense.
Removed 4 screws on door cover, 6 screws on dispenser 4 wires and reinstalled new one. Done less than 20 minutes.
Parts Used:
-
Johnie from Aztec, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lower spray arms were curving upward because of drying heater element, catching on lower rack, and wasn't turning or cleaning anything.
Pulled the bent spray arm straight out, snapped the new arm back on. Took 10 seconds, and no tools needed. Wish all repairs were that easy....
Parts Used:
-
David from Westfield, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Bottom door gasket had fallen out.
I had tried to put the old gasket back in place while waiting for the new to arrive and in doing so, the gasket had gone up beyond reach.We removed the screws on the inside of the door and I was able to reach and remove the old gasket. After replacing the screws, I then simply slid the new gasket into place. Easy! If I can do it, anyone can. Flo
Parts Used:
-
Flo from Hannibal, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door Leaking
All I have to say is paets select is the best company I have delt with in the last 20 years
Parts Used:
-
willis w from broomes island, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the tub was leaking at the right front corner
-
Raymond from El Paso, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replaced Cover and Stem Assembly Frigidaire DW
Your site is awesome.. not only show the parts but a video for the repair as well.. very smart site.. I will be back.. The repair was quick and easy. thank you..
Parts Used:
-
jamie from Fairfield, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lower Sprayer Arm Wouldn't Stay On
Took lower tray assy. Out and took 3 screws out of cover and stem assy. And replaced old with new. Took me about 15 min. Part was perfect match so job was a piece of cake.
Parts Used:
-
Charles from Del Valle, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Door Leaked At The Bottom Corners
Pull the old door seal down and out starting at one end. Push the new seal back in, noting the small notch location. Done!
Parts Used:
-
Jason from Ferndale, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!