Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FDB1050REM2 > Instructions

FDB1050REM2 Frigidaire Dishwasher - Instructions

All installation instructions for FDB1050REM2 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FDB1050REM2
406-420 of 557
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Leaking at the door

  • Customer: John from Hammonton, NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just pulled the old one out and installed the new.

lower rack was rusted and vinyl covering was coming off

  • Customer: Robert from Kannapolis, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
new lower rack was perfect fit, roll the old one out and roll the new one in.

Tips on rack were rusted and leaving marks on my dishes.

  • Customer: Patti from Houma, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
everything went great. Just took out the old and put in the new. No problenms at all. I will be referring your company to everyone I know, Soon to be ordering part for my refrigerator, it's about 10 years old.

The diswasher racks were rusty, rubber falling off.

  • Customer: R from Sun City West, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed racks and replaced them. Didn't need tools. Easy Peasy!

Water inlet valve leak

  • Customer: Marshall from Newnan, GA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Repaired with installation instructions from PARTS-SELECT. Worked perfect!

Water leaking from the bottom of the door

  • Customer: Michael from Ridgewood, NJ
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Very easy project. The bottom gasket slides out very easily and inserts just as easy. Just make sure you push it in all the way. Tub gasket is also easy - lineup the mark on the gasket (shows where the center is) with the top door latch and run it in the insert on either side. Cut off the excess but make sure you run it all the way around letting a portion stick out horizontally at the bottom (too short and the door will still leak). Run a quick wash cycle to make sure it seals properly and you're done - no tools needed.

dishwasher door was leaking.

  • Customer: Dean from Boscobel, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pulled out the gasket,trimmed the gasket to fit and alittle pressure to put.it in place, very easyto do. No worries any one can do this and savek yourself costly repair person.

Leaky inlet valve

  • Customer: Lance from Chandler, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
Cakewalk, replacing a water inlet valve is self-explanatory. Take the old one off, put the new one on .. that's pretty much it.

Water leaking from dishwasher

  • Customer: Steven from Buffalo, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The bottom gasket was really delivered quickly for the Xmas season. Watched the online video for removing and replacing the Bottom Gasket. Five minutes later was loading dishwasher for the trail run. No leaks dishwasher back online.

leaking

  • Customer: Juan from Cumming, GA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Replaced bottom and tub gasket

The dishwasher was leaking.

  • Customer: Michael from Noblesville, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I replaced the bottom gasket and the tub gasket. replacing them both was very easy. I pulled the tub gasket out by using a screw driver and popping out a section then pulled it out. Installed new one by just pushing it in. Bottom gasket was simple as well. There was a notch in the gasket on the right side so you can't screw it up on which side goes where. Pulled the old one out and pushed the new on in. I found it easier to install the right side with the groove first. Both gaskets helped. However dishwasher was still leaking. Another person had mentioned that the spinner that shoots the water on the bottom, had a hole in it and was shooting water towards the door. I examined both of them and found that the bottom one had a bigger hole on the very end. It looked like it hit something and made the hole bigger. I temporarily put duct tape over it and it has't leaked. Plan on ordering the new part today.

damaged bottom rack/rust

  • Customer: Wilma from York, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just slid out the old rack and pushed in the new one. As a 70 year old lady with NO mechanical skills, it took me longer to get it out of the shipping box than into the dishwasher.

Dishwasher was leaking water onto the floor

  • Customer: miles from hoboken, NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I viewed a very short video on how to replace the lower gasket on the website which was extremely useful. I then ordered the part via standard shipping and it arrived very quickly. I used the flat head screwdriver to gently loosen the old gasket which has mineral buildup on it and was stuck into place. Sliding the new one in was a snap. This was one of the best sites as you could search for the part by describing the problem. I would definitely use it again!

something had jambed in bottom of dishwasher causing lower spray arm to jamb and break pins on other 2 parts then it came off assembly and lodged against warming coil and melted

  • Customer: Michael from Elkhart, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Took all 3 parts off, 5 minutes, went on line did search for make and model and parts distributor, ordered parts by part numbers, received parts very quickly, 5-10 minutes to install. Very easy tp locate parts with all the diagrams online and very helpful. Easy to use ordering system and very fast processing.

Water leaking from the washer

  • Customer: Charles from Mount Pleasant, TX
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
R&R the tub gasket and the door gasket. Repair not effective, it still leaks.
All Instructions for the FDB1050REM2
406-420 of 557