FDB1050REM2 Frigidaire Dishwasher - Instructions

The 'kick plate' had to be removed, and the feet had to be raised to lift the unit over the floor. the old spring could not be found, and while lying on the floor my husband had to 'feel' for the attatchments to hook up the new spring. The unit was then pushed back and the legs dropped and the unit attatched to the counter. All fixed - - thank you PartSelect for having the right spring.

Order the part here, it arrived in days, pushed it on it's base. all done!

Had a leak, due to the factory gasket was 1/2 " to short. Pulled out old one, installed new one, and trimed to fit. Took less the 5 minutes.

Orderd new gasket which arrived extremely fast, old gasket just pulls out , installed new one same direction as the old gasket fit, stopped leak. Thanks!

After watching a wash cycle with the front cover off, I noticed water coming out from the bottom of the pan, under the Gasket. Pulled the gasket down out of the slit and reinstalled the new one exactly as the old one came off, with the wiper angled the correct direction.

Both heating element brass nuts had a split in them. They had fallen off the heating element and were hanging on the electrical wires. I removed the wires from the heating element and removed the brass nuts from the wires. I then screwed the new nuts on the heating element and reattached the wires. problem solved. I want to thank you for having the parts I needed as Sears had discontinued them for this Kenmore appliance.

pull out the old gasket, the right side has a notch to fit the new one. insert until gasket won't go farther.

Removed front panel and eased out screws holding the dishwasher in place. Lowered the door and removed old springs. Replaced the springs and sit the unit back in place. When they are this old it is best to replace both springs. Rated easy...,

I want to praise your company for getting the part to me quickly and the parts being right. I have found this most difficult for many online companies. Thank You Tom Z

Installed New rollers onto bottom rack. Part order & delivery were top notch from Partselect. Will definitely order from them again.

Couldn't have asked for an easier fix, directions were superb, ship time - unbelievably fast and above all, I saved almost two hundred dollars by not having a certified repair person come out to my home. Thank you Partselect!

Rolled out the old rack, rolled in the new rack. Took less than a minute. THANKS!

my husband did the repair. he followed the instructions how to put it in. very easy. solved the problem of leakage.

Really easy to install I just removed the old spray arm in and insert the new one. Ordering from your company is really a worthwhile experience fast, easy and shipping was quick. Thank you!!!

pulled out the old one. ordered a new one and stuck it in. easy repair for 20 bucks.