Parts That Fix Frigidaire Dishwasher FDB1050REC2 Will Not Start
Will Not Start is a commonly reported symptom for the FDB1050REC2 Frigidaire Dishwasher, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your FDB1050REC2 Frigidaire Dishwasher that will fix Will Not Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Note: This part has been updated by the manufacturer. It may appear different than the original but will still function the same.
This is a 4-button board. This part would be the main "brains" of the appliance which is activated by selecting a certain function with the touchpad.
The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.
This door strike is mounted to the top of the dishwasher cabinet. This part catches the door handle to keep it closed.
This part has been redesigned by the manufacturer and may appear different, but will function the same. This kit helps propel the water through the spray arms.