Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit you will have to cut o...
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing...
This tempered glass is supplied by the original manufacturer and measures 20 inches by 13 inches. It is an inner door glass, designed for use in ranges/ovens and has several purposes which include pro...
This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also kn...
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel t...
This meat probe sensor is an authentic manufacturer replacement part for cooking appliances that have a built-in meat probe feature. It is plugged into the receptacle assembly for use inside the appli...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
March 8, 2022
Oven does not heat up either on bake or broil
For model number EW30ES6CGS4
Hello Bill, Thank you for the question. If both the bake and broil stopped working at the same time, this is normally an indication the Oven Control Board is faulty and may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Good Morning - the stove is showing an error E and 15 on the two front burners. can you please tell me what parts will be required to get this fixed
For model number EW30ES6CGS4
Hi Roslyn, thank you for contacting us. First, try to hard reset the unit. If this does not work, the error you are getting means that there is a communication error between the display board and the main relay power control board. It could be an issue with either board or the ribbon cable/wiring in between. If the wiring is ok, we suggest you replace the relay board, part number PS1991657. And if it does not fix the issue replace the electronic control board, part number PS2378973. If you require assistance placing an order, please contact customer service. We hope that helps!
What causes the top oven element to stay on and not mdulate to maintainthe set temperature? Fault 10 showing
For model number EW30ES6CGS4
Hello Bill, thank you for the question. According to our search, the F10 error code indicates that your electronic control board has detected a runaway temperature. It's possible that your range is not heating to the temperature that you set it at or that the control board may be reading the temperature incorrectly. You may need to replace the temperature sensor, part number PS820208, to fix the issue. We hope this solves your problem!
The induction cooktop no longer lights up on the right side. Left side oven lights up no problem so I don’t believe there’s a power supply issue
For model number EW30ES6CGS4
Hi Kyle, thank you for reaching out. Based on the description that you have provided, we would recommend checking the controller assembly, part number PS2333283, to fix this issue. We hope this solves your problem!
This slide in range is overheating and appears not to cool off when turned off. I replaced the temperature sensor probe but it didn't fix the issue. What would be the next step for this range? It less than 10 years old.
For model number EW30ES6CGS4
Hi Rafe, thank you for contacting us. Since you have already replaced the temperature sensor and that did not fix the issue, we would recommend checking the exhaust fan motor, part number PS2203367, to solve the problem. It circulates cooling air to prevent overheating the controls and range surfaces. We hope this sorts out your problem!
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven
... Read moreand attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede
... Read mored are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the differ
... Read moreent sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
