ERV36 Dacor Range Hood - Overview

Models starting with ERV36

Keep searches simple, eg. "belt" or "pump".
Downdraft Vent Switch – Part Number: DE81-09306A
Downdraft Vent Switch
PartSelect #: PS16632154
Manufacturer #: DE81-09306A
$60.43
  Special Order
Switch Harness Kit – Part Number: DE81-07174A
Switch Harness Kit
★★★★★
★★★★★
(2)
PartSelect #: PS16556804
Manufacturer #: DE81-07174A
$204.87
  In Stock
Filter Grille – Part Number: DE81-08655A
Filter Grille
PartSelect #: PS16631758
Manufacturer #: DE81-08655A
$116.57
  In Stock
Drive Motor Switch – Part Number: DE81-04650A
Drive Motor Switch
PartSelect #: PS16554190
Manufacturer #: DE81-04650A
$294.76
  In Stock
Service Slim Line Knob – Part Number: DE81-09307A
Service Slim Line Knob
PartSelect #: PS16632155
Manufacturer #: DE81-09307A
$19.95
  In Stock
Clip – Part Number: DE81-10408A
Clip
PartSelect #: PS16632824
Manufacturer #: DE81-10408A
$6.95
  In Stock
SVC Pot Harness Kit – Part Number: DE81-04013A
SVC Pot Harness Kit
PartSelect #: PS16628467
Manufacturer #: DE81-04013A
$54.95
  In Stock
Fan Speed Control Kit – Part Number: DE81-05286A
Fan Speed Control Kit
PartSelect #: PS16629416
Manufacturer #: DE81-05286A
$85.11
  In Stock
Slim Relay – Part Number: DE81-08250A
Slim Relay
PartSelect #: PS16631509
Manufacturer #: DE81-08250A
  No Longer Available
Drive Arm – Part Number: DE81-10298A
Drive Arm
PartSelect #: PS16632761
Manufacturer #: DE81-10298A
$190.77
  In Stock
SVC-SCREW;83408,#8-32X 3/4 PHIL,DR30D-C/ – Part Number: DE81-02063A
SVC-SCREW;83408,#8-32X 3/4 PHIL,DR30D-C/
PartSelect #: PS16627141
Manufacturer #: DE81-02063A
$6.95
  Special Order
Service Harness Potentiometer – Part Number: DE81-03989A
Service Harness Potentiometer
PartSelect #: PS16628447
Manufacturer #: DE81-03989A
$36.95
  In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I bought the wrong unit
The downdraft vent I wanted would rise up 10". The one I ordered went up 15". Looked like the Great Wall of China on our countertop. Dacor tipped me off on the change out of the drive arm and raise arm to make it rise less. The raise arm still proved to be about 3.5" too long so I had to drill a new hole in it and lop off that much steel to make it work. Looks perfect on the rise up now. Thanks
Parts Used:
Drive Arm Slim Raise Arm
  • Donald from Metairie, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!