Models > ERSD48LPH > Instructions

ERSD48LPH Dacor Range - Instructions

All Instructions for the ERSD48LPH
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Temp sensor is failing
I did not do the repair since the part shipped was not the correct one. I have contacted Customer Service by phone and mail and nothing has been resolved.

I would, at least, like to return the incorrect part. An new one would be great but not holding out hope.
Parts Used:
SVC-TEMP SENSOR KIT ROBERTSH;86663,ERSD3
  • Sarah from FORT COLLINS, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced bottom relay control panel
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose pliers and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.
Parts Used:
Svc- Relay Pcb
  • David from BUENA VISTA, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dacor sent a different bulb # which I CANNOT get back into the oven.
I have contacted Dacor repeatedly with no response, by both phone and left my return contact and email.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.
Parts Used:
SVC-HALOGEN BULB 10W 12VAC;86573,ERD36S0
  • Marilyn from INDIAN WELLS, CA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ERSD48LPH
1 - 3 of 3