All Installation Instructions for Dacor Range ERDE48NG

F2 Alarm and oven beeping

Replaced relay board

Parts Used:

Svc-Relay Board

David from CAMILLUS, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replaced bottom relay control panel

First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose pliers and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.

Parts Used:

Svc- Relay Pcb

David from BUENA VISTA, CO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dacor sent a different bulb # which I CANNOT get back into the oven.

I have contacted Dacor repeatedly with no response, by both phone and left my return contact and email.
I could not be more disappointed in Dacor. All this for a problem which is listed as a home maintenance issue. A light bulb for $41.77 that I cannot install.

Parts Used: