Parts That Fix Electrolux Washer EIFLW55HMB0 Lid or door won’t close
Lid or door won’t close is a commonly reported symptom for the EIFLW55HMB0 Electrolux Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your EIFLW55HMB0 Electrolux Washer that will fix Lid or door won’t close. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
The door strike is used in washers and is attached to the door to activate the switch when the door is closed. This ensures that the washer door remains locked and closed. If your door does not stay open, or it gets stuck, replacing this part can solve the problem. This part comes in a gray color and is made from metal. This door strike is a genuine replacement part. As a safety precaution remember to unplug your washer from the power source and wear work gloves before installing this part. Refer to the diagram provided by the manufacturer for more installation instructions and guidance.
Customer Repair Stories
Stricken broke pot metal.
-
Michael from BONNEY LAKE, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Broken door latch
But I found out that the part had actually shipped on the 3rd, as the email had informed me. It didn't actually ship until the 4th - up until then, a "shipping label" had been created but it had not shipped. FedEx then revised their arrival date to Monday, 8 July.
That clearly wasn't satisfactory. So I went to my local parts distributor, Dayton Appliance Parts, a fifteen-minute drive from my house, and got the same part for $3 cheaper, plus without the $25 shipping fee that PartSelect had charged me for overnight-shipping-that-isn't-actually-overnight-shipping.
Once I had the part in hand, installation was a breeze. Two screws removed, pulled the striker, replaced the new part and the screws. Less than two minutes.
But no thanks to PartSelect.
-
Paul from DAYTON, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This is an authentic OEM part sourced directly from the manufacturer.
Customer Repair Stories
Door to washing machine would not close properly
-
Paul from ROCKLAND, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
