EIDW6305GW1A Electrolux Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No water flow
Changed out Motor and Pump also canged out control box but no joy
Parts Used:
-
Craig from Yuma, AL
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
The spray arm center moving part was broken off the stationary part.
I used a screwdriver to pry the Spray Arm Center snaps loose from the top drainer basket, and the same screwdriver to pry the Spray Arm Center into position. Job done..!!!!
Parts Used:
-
David from Toledo, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
was not washing dishes good. rubber gasket was all soft like putty didn't seal
-
Gary from Brighton, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
New model did not come with knive tray
Ordered the Versa Tray that was a component of the old dishwasher but not of the new replacement machine. The fun part was the ease of finding the part with Part Select, and the fact that it was fifty per cent the cost of the manufacturer's part on the official web site. Installation is simply to place the over rack hooks on the side of the tray in place and using it! Love the service and handling of the back order situation. Great communication and dspeedy delivery. Thanks guys!
Parts Used:
-
Robert from Fort Myers, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken bracket
Easily removed the broken bracket and snapped the new one in its place. Took less than 30 seconds!
Parts Used:
-
Tracie from Tyler, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
dishes where not getting clean
I ordered the part and snapped it into place without any problems. I didn't even have to take the rack out to do it.It took about 4 mins.
Parts Used:
-
Jessie from Covington, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dispenser would not dispense.
Removed 4 screws on door cover, 6 screws on dispenser 4 wires and reinstalled new one. Done less than 20 minutes.
Parts Used:
-
Johnie from Aztec, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The center spray arm with manifold was warped and did not spin when the dishwasher was running.
We snapped the broken spray arm off, and snapped the new arm on. We had to use the screw driver as leverage to snap on new spray arm.
Parts Used:
-
Melissa from Black Hawk, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Arm Broke
First I tried to pry the arm off the basket with a screwdriver. Then I googled it and there were the simple instructions, and I followed them, pull to take off, to put on push after aligning arm on basket til it snaps on.
Parts Used:
-
Hope from Garland, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!