Part Location Diagram of WD08X10059 GE Short Bottom Door Seal
See part 845 in the diagram
Replacing your General Electric Dishwasher Short Bottom Door Seal
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Short Bottom Door Seal WD08X10059

 Fits your EDW5100N10BB Dishwasher!
★★★★★
★★★★★
3 Reviews

Rated by 5 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 118.36
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your EDW5100N10BB Dishwasher!
PartSelect Number PS1018448
Manufacturer Part Number WD08X10059
Manufactured by GE
Product Description

Short Bottom Door Seal Specifications

This part is located at the bottom of the door. It prevents water from leaking out of the dishwasher.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Dishwasher Short Bottom Door Seal

Replacing your General Electric Dishwasher Short Bottom Door Seal
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD08X10059 replaces these:
AP3860882, 1168254
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.3
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Bottom door seal had crumbled with age
Removed inside of door, slide bottom seal on and put inside door back on. Job done!
  • Dorothy from LAKE WALES, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking door
changed the door gasket no tools,just pulled out the old,lined up the dot (printed on gasket)on the new and started at the top pushed in the new took five minute,the short bottom door seal required a phillips head screwdriver to remove the inside door screws(six screws) the two on the bottom are different they attach to the door hinge and are machine thread the other four are coarse thread.lifted off the panel slide off the old(pay attention to which way the curve goes) slide on the new replaced the panel put in the six screws.the job is done! the door will be tight to close but will be easier after a few uses.
Other Parts Used:
Short Bottom Door Seal Tub Gasket
  • MARIA from DETROIT, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Seal was broken
Took screws out of door. Slid bottom seal off and slid new one on.
  • Roger from Demorest, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
seal around bottom of door leaking heavy water onto floor during use
First you must remove all screws around inside door frame, and remove panel. (I would recommend using something to weight door down after removing panel from door as it will try to continue to close) Flip panel over and remove old seal by simply pulling off, paying close attention to how the seal is fitted and direction it faces. Clean area of any debris,and let the learning curve begin, after several frustrating attempts, I found it easier to install new seal by first installing it backwards by sliding seal along its track and groove, this will allow it to loosen up, then remove it and install the seal by lapping it over the the track and snapping/sliding it into place. The repair itself from the service center would of been $180.00 - $200.00, I did it myself for $39.00. I would recommend anybody with a sense of aptitude and patience to do this repair themselves. After some research I found out that this model and problem is a common repair, which is somewhat ridiculous in my opinion, as the machine itself is only 2 1/2 years old and it came pre-installed in a new home.
  • John from Hillsboro, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
53 of 65 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door seal was never installed when machine was manufactured
removed two bottom screws on inside door panel and slid seal onto spline, reinstalled screws. Job done
  • John from Lakeport, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
February 19, 2018
The image on this item does not look very wide compared to the door itself. What are the dimensions of this seal?
PartSelect logo
Hi Tim, Thank you for your question. The dimensions of the short bottom door seal are 21 3/4 inches by 3 inches. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1018448
Manufacturer Part Number: WD08X10059
Brand
Model Number
Description
General Electric
4070100
Dishwasher
General Electric
4070110
Dishwasher
General Electric
4070500
Dishwasher
General Electric
4070510
General Electric
4070600
Dishwasher
General Electric
4070610
Dishwasher
General Electric
4070800
Dishwasher
General Electric
4070810
General Electric
4071100
Dishwasher
General Electric
4071110
General Electric
4071120
Dishwasher
General Electric
4071500
Dishwasher
General Electric
4071510
General Electric
4071520
Dishwasher
General Electric
4071600
Dishwasher
General Electric
4071610
General Electric
4071620
Dishwasher
General Electric
EDW5000L00BB
Dishwasher
General Electric
EDW5000L00CC
Dishwasher
General Electric
EDW5000L00WW
Dishwasher
General Electric
EDW5000L15BB
Dishwasher
General Electric
EDW5000L15CC
Dishwasher
General Electric
EDW5000L15WW
Dishwasher
General Electric
EDW5060L00SS
Dishwasher
General Electric
EDW5060L15SS
Dishwasher
General Electric
EDW5100N00BB
Dishwasher
General Electric
EDW5100N00CC
Dishwasher
General Electric
EDW5100N00WW
Dishwasher
General Electric
EDW5100N10BB
Dishwasher
General Electric
EDW5100N10CC
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service