ED5VHGXMB10 Whirlpool Refrigerator - Instructions

I knew my ice maker was still working and I could hear that the switch on my water was still making the usual noise when tripped, so I knew that it had to be the inlet valve. I googled some videos and luckily found PartSelect.com. I used there diagnostics, looking at the percentages of other parts used to fix like problems. The part install was very easy as all I had to do was turn off the water and unplug the frig, remove the part, cut the input line and both output lines. Then slide those into the new part, with quick connects you just slide them in, the old part had compression fittings. Reattach the new part turn on the water, plug it back up, watch for leaks, your done..pretty sweet.

Did troubleshooting as manuel indicated. Had same problem once before. The replacement did the trick.

I simply followed the video on the partselect web site on my laptop while I did the replacement and it was easy! The online videos are the greatest way to do the repairs.

I watched the video provided on your website and followed the directives. It was just as easy and simple as noted in the video.

Before purchasing the part, I watched the ParSelect installation video. The video gave me the insight as to my ability to replace the part and the correctness of the part for my ice bin. The video made it extremely easy and quick to replace the auger drum (propeller looking thing that pushes out the ice).

removed the ice maker and removed all the parts to see what was needed. Only needed the drum. Very easy to do yourself and received the part very quick. Completed the job in about four days due to waiting on part. The work to take apart and put back together about one hour.

Unplugged refrigerator. Removed back panel to expose compressor, unplugged start device, removed the wire keeper, had to use a flat screwdriver to pry off the start device from the compressor prongs. Was not sure run capacitor was damaged but replaced it any way. Installing the new start device was as simple as plugging everything into there respective places. Reinstall the wire keeper, and back panel. Plugged the refrigerator in. All is back to normal.

It was nice to see that the replacement auger was made out of metal, I have a great sense of safety now. The part fit perfectly and works better than it did before!!! Thanks for the quick delivery and a better part. I give you guys 5 stars. Did I mention the price was right also!!!

This is a very easy fix. Begin by emptying the contents of the door. Then, just remove hinge cap and remove the three hinge screws. The door can then be lifted off the hinge pin and placed on its side. Once this is done, replace the two can pieces (one on the door and one on the frame). Then just lift the door back in place and secure the hinge. This job can be done by one person (maybe two if you need help place the door on a work surface) and will take just 15 minutes.

The small arm in the tray for the ice maker stopped moving. I put hot water in there to see if anything was clogging up the line or the tray, but nothing was. I then pushed on the arm and it moved pretty easily. So I took off the front cover and the motor; I saw that the plastic piece connecting to the gear was broken. So I realigned and replaced the motor. Ice maker is working like a champ again.

We bought the fridge used and immediately see why it was being sold. But ordered a new thermostat and with Part Select's instructional video was able to replace the thermostat. I should mention it was my first attempt making any repairs to a refrigerator. It was fairly straightforward project.

First of all when deciding where to order part from I could have saved a couple of bucks on another site but I chose PartSelect because of the video showing exactly how to install the part. When installing the new part it went in exactly as described. Part seems sturdy. Ice bin now works like new again. Hopefully it will last at least as long as the original. Part was good, delivery was quick. I will look here again if I need more parts for any appliance.

Took out the door bins, 1 bolt on the plastic cap, 3 bolts on the hinge, took the door off, replaced cam at the bottom, all same size bolts, reset the door spent longer time cleaning the door selfs all done by my self in less than 30 min. others said it helped to have second pair of hands "my wife would of just got in the way :)"

Pulled off front. Detached wires without getting electrocuted. Marked them first so I'd know where they go. Pushed up the thing with wires so I could see the flap door. It had a heat thing in the flap which my replacement part didn't have, so I had to pull it out of the broken flap and insert in the new flap. Snapped flap door in place. Attached black thing loop to white thing. DIdn't use the spring or the white thing. Reattached wires and put on front piece. Everything now works. No more frost in the freezer!!!

i wasn't sure if this piece would fix my problem until i got into it and the tabs on that side if the bracket were broke preventing the control arm from accuating the dispenser.did as the video described. took the time to do some cleaning while i had the face plate off. i am recommending partselect to all my family and friends. i would quess this saved me $150 on a repair call!