Models
>
DWHD650GPR
DWHD650GPR (16) Thermador Dishwasher - Overview
Sections of the DWHD650GPR
[Viewing 6 of 6]Keep searches simple, eg. "belt" or "pump".
Dishrack Roller - Grey
PartSelect #: PS8727387
Manufacturer #: 00611475
This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
$11.12
In Stock
Drain Pump - 55Hz
PartSelect #: PS8727352
Manufacturer #: 00611332
The pump ejects the water from the dishwasher through the drain hose.
$59.42
In Stock
Inner Door Panel Screw Kit
PartSelect #: PS8695919
Manufacturer #: 00151703
Includes 6 screws. You will need a size T20 Torx screwdriver.
$9.80
In Stock
Dishwasher Door Hinge Lever Bearing
PartSelect #: PS8697061
Manufacturer #: 00165296
This door hinge lever bearing is for dishwashers. Door hinge lever bearing allows the door hinge lever to move smoothly.
$22.39
In Stock
Questions And Answers for DWHD650GPR
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the DWHD650GPR
[Viewing 8 of 8]Not draining
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
rollers broke
pushed with thumb pressure and snapped rollers into place.....EASY
Parts Used:
-
Dennis from PLEASANTVILLE, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
13 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
There was a roller missing from the lower washing rack.
There were 5 rollers still in place so I used them to show me how to snap the replacement roller in place.
Parts Used:
-
George from STURGEON BAY, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper door seal (the surround seal) was leaking
This is a piece of cake. No tools are actually needed. Grasp one end of the old seal and gently pull it out of the groove in which is fits. Take the new seal, and paying attention to which way around it fits (there is a right and wrong way!) start at either end. Leave an inch or so beyond the groove to rest on the bottom of the dishwa
... Read more
sher, and press the seal in place in the groove. You should have an inch or so left at the far end. Go back and go all along the seal and make sure it is pressed evenly and completely into the groove the full length.
You're done.
You're done.
Read less
Parts Used:
-
James from NEW HARTFORD, CT
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!