Models > DWHD630GPR

DWHD630GPR (53) Thermador Dishwasher - Overview

Sections of the DWHD630GPR

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Adjustable Tine Row Clip – Part Number: 00611981
Adjustable Tine Row Clip
★★★★★
★★★★★
(2)
PartSelect #: PS8727471
Manufacturer #: 00611981
This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in...
$5.87
  In Stock
Door Seal – Part Number: 00494772
Door Seal
★★★★★
★★★★★
(5)
PartSelect #: PS8723143
Manufacturer #: 00494772
This seal is also referred to as a door gasket, and it is designed for use on dishwashers. It is installed on the door of the appliance, and it seals the space between the tub of the dishwasher and th...
$31.16
  In Stock
Water Inlet Valve – Part Number: 00607335
Water Inlet Valve
★★★★★
★★★★★
(7)
PartSelect #: PS8726680
Manufacturer #: 00607335
This is a replacement water inlet valve for your washer. The water inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water enterin...
$62.77
  In Stock
Drain Pump – Part Number: 00642239
Drain Pump
★★★★★
★★★★★
(4)
PartSelect #: PS8729769
Manufacturer #: 00642239
The drain pump ejects the water from the dishwasher.
$137.64
  In Stock
Lower Door Seal – Part Number: 00432490
Lower Door Seal
★★★★★
★★★★★
(2)
PartSelect #: PS8714648
Manufacturer #: 00432490
This door seal, also known as a door gasket, is an authentic manufacturer replacement part for your dishwasher. It is responsible for creating a watertight seal between the tub and dishwasher door and...
$43.24
  In Stock
HOLDER – Part Number: 00616990
HOLDER
★★★★★
★★★★★
(1)
PartSelect #: PS8728043
Manufacturer #: 00616990
$5.37
  In Stock
Dishrack Stopper Kit – Part Number: 00165254
Dishrack Stopper Kit
★★★★★
★★★★★
(1)
PartSelect #: PS8697039
Manufacturer #: 00165254
A holder is used in dishwashers, it is known as the dishrack stop kit. This kit comes with both the front and the rear stop, these parts are installed at either end of the rails that the upper rack sl...
$12.05
  In Stock
Dishwasher Screw – Part Number: 00188670
Dishwasher Screw
PartSelect #: PS8698262
Manufacturer #: 00188670
$20.32
  In Stock
WHEEL – Part Number: 12004485
WHEEL
★★★★★
★★★★★
(4)
PartSelect #: PS10058839
Manufacturer #: 12004485
This wheel kit is used for the lower rack of your dishwasher. The kit includes 8 wheels and axels. To install you can simply clip the wheel onto the frame. There are eight wheels on the lower rack in...
$44.50
  In Stock
Lower Dishrack – Part Number: 00249276
Lower Dishrack
★★★★★
★★★★★
(9)
PartSelect #: PS8701740
Manufacturer #: 00249276
$264.70
  In Stock
HOSE-DRAIN – Part Number: 00668108
HOSE-DRAIN
★★★★★
★★★★★
(3)
PartSelect #: PS8732952
Manufacturer #: 00668108
$30.52
  In Stock
HOLDER – Part Number: 00616989
HOLDER
PartSelect #: PS8728042
Manufacturer #: 00616989
$7.25
  In Stock

Questions And Answers for DWHD630GPR

Be the first to ask our experts a question about this model!

Common Symptoms of the DWHD630GPR

[Viewing 10 of 10]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not draining
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Noisy
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Not drying dishes properly
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Spring assembly on detergent and rinse aid dispenser broke so the sliding lid would not operate
Here are the steps you need to take to do the job properly:

1. turn off electrical circuit breaker to the dishwasher
2. remove 8 total hex screws (3 on each side and 2 at the top) of the inside door panel. The door panel will slide off so be careful and it happens pretty quickly when the last hex screw is removed.
3. unplug the wiring harness to the detergent/rinse aid dispenser
4. you need to use a flat head screw driver to lift the metal flanges on the top and bottom of the detergent/rinse aid dispenser.
5. the unit will pop out toward the inside of the dishwasher
6. insert the new detergent rinse/aid dispenser and very important all metal flanges are pulled back over the plastic edge (top and bottom) of the dispenser unit. The screw driver needs to be used to assist in pushing the dispenser unit as tight to the frame of the door to ensure the metal flanges grab hold and lock in.
7. re-attach the wiring harness
8. re-install the dishwasher door with 8 hex screws. Doing this step alone is challenging as the door frame will want to keep going up to close. I used a small foot stool and placed it inside the dishwasher front area on top of the inside metal door area so the door would stay open roughly half way. I then used my knees to prop up the outer door cover while i got 2 screws started then was able to easily complete the job.
9. run the dishwasher with a detergent packet loaded into your new dispenser. I checked for 15-20 minutes during initially running to insure no issues or leaks.
10. One last note - my Bosch dishwasher had a custom wood door installed to the outer panel to blend in with our kitchen cabinets. The door itself was much heavier as a result. Some of you may not experience the slight difficulty i noted above in step 8. Good luck.
Parts Used:
Detergent and Rinse Aid Dispenser
  • Steven from SUWANEE, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
14 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher not draining
I used a wet vac to remove the water from the dishwasher. remove cover and filter/strainer from bottom of dishwasher. remove screw which allows you to lift the plastic piece to access check valve. Original check valve looked like new , I installed new check valve re installed parts . Job done and issue resolved .
Parts Used:
Check Valve
  • Bruce from MOUNT VERNON, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My dishwasher was not draining
With the help of You Tube, this 50 year old Mom got the job done. Not that complicated if you watch the step by step instructions on the Appliance Pro video. My repairman and husband were both determined to just buy a new one but this 20 year old dishwashing genius was just in need of a little repair. Only need a screwdriver, and slightly confusing as wires hook on a little different on new pumps. I suggest watching video the whole way through and then playing it step by step as you do the repair. Worked great for me. Thanks.
Parts Used:
Drain Pump
  • Karen from CRESTON, IA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!